How do I reset my Genie scissor lift?
hold the button and turn the key switch to the ON position. hold the button and turn the key switch to the ON position. (O TO 10 SECONDS, 2 IS THE DEFAULT.
Why is my genie lift beeping?
If there is a beep after the outriggers reach full extension, then it is likely the timer module is out of adjustment. To re-adjust the timer module, located inside the control box: • Begin by turning the blue knob on the timer module, counter- clockwise to the . 1 second interval, then try auto leveling again.
Can you drive a scissor lift while elevated?
Elevated drive speed for Aerial work platforms: It goes without saying that you can drive Aerial Work Platforms (AWPs) forward and reverse, like just about any vehicle. When the boom or scissor lift is elevated, the machine is less stable, and driving at an excessive speed could cause the AWP to tip over.
How high does a Genie GS 1930 go?
25 ft
Overview
| Specification | Value |
|---|---|
| Max Working Height | 25 ft | 7.79 m |
| Capacity | 500 lb | 227 kg |
| Machine Width | 2 ft 6 in | 0.76 m |
| Machine Length | 6 ft | 1.83 m |
Do you need a key to operate a scissor lift?
Scissor lifts use a key to start the lift and turn it off. Take your key and insert it into the ignition next to the large red button on the control panel. Turn the key to the right to turn the lift on.
Can a scissor lift move while elevated?
Moving a scissor lift whilst it’s platform is elevated, especially at great height, is dangerous, even for those who are IPAF trained. Not only could it encounter uneven ground and tip, or meet overhead obstructions and cause damage, but the weight distribution of the equipment could also cause it to fall when moved.
How long does it take to charge a Genie scissor lift?
approximately 12 to 16 hours
Comparatively, Genie lifts and other types of electric aerial work platforms (AWPs) can take approximately 12 to 16 hours to charge. It may be possible to use a scissor lift while the machine is being charged, too.
What do you need to know about the Genie gs-1530?
Read, understand and obey the safety rules and operating instructions in the appropriate Genie GS-1530 & Genie GS-1930 Operator’s Manual before attempting any maintenance or repair procedure. This manual provides detailed scheduled maintenance information for the machine owner and user.
How tall is the Genie gs-1930 scissor lift?
GS-1930. The Genie ® GS ™ -1930 slab scissor lift is easy to maneuver in tight spaces, has a 25-ft working height, boasts quiet electric, zero-emissions operation and is ideal for indoor and outdoor applications on firm, level surfaces.
What are the malfunctions of a Genie lift?
Genie Lift Malfunctions 1 LED Diagnostic Readout. Most Genie Lift devices have an LED diagnostic readout display that provides a malfunction code. 2 Machine Does Not Drive. If the Genie Lift will not drive, malfunction code 18 displays on the diagnostic readout. 3 Machine Does Not Lift. 4 Steering. 5 No Power.
What does code 18 mean on a Genie lift?
If the Genie Lift will not drive, malfunction code 18 displays on the diagnostic readout. It can appear if the pothole guard is blocked or the pothole limit switches are not activating.