What are the trouble codes for International trucks?

International Trucks Diagnostics Trouble Codes (DTCs) for Model: 3200, 4100, 4300, 4400, 7300, 7400, 7500, 7600, 7700, 8500, 8600, BE 200, CE Bus, CXT, DuraStar, LoneStar, MXT, ProStar, RXT, TranStar, WorkStar

How are diagnostic trouble codes set on an ECM?

The electronic control units (ECUs) that communicate on the SAE J1939 data link, communicate according to the SAE J1587 standard. The diagnostic trouble codes (DTCs) set by the ECUs contain information that is described by the following abbreviations.

When to set code 134 or 135 on your ECM?

If neither the APS or IVS is changing, or both are changing, or the ECM cannot determine which is at fault in a specified time, code 134 is set. Engine rpm is restricted to idle. When code 135 is active the amber ENGINE lamp is illuminated and the odometer displays the message WARN ENG.

Where do I find the Diagnostic Code on my truck?

The ability to display diagnostic trouble codes (DTC) is an optional feature. Codes may be displayed on either the gauge cluster or an optional vehicle information display (VID). The vehicle must be equipped with the option to display codes in both cases.

How do you find the engine code on an IH 4300?

You then count and record the flashes of the Amber engine light. They are 3 digit codes. The code list is in the stickies I believe. A bit of a PItA but it works. To clear codes you hold the buttons, turn key on and pump throttle 3 times.

How do you clear a code on a 4300?

To clear codes you hold the buttons, turn key on and pump throttle 3 times. Well I tried it on the truck im driving. (2002 4300 dt466e) No flashes.

How to know if a DTC is not available?

Suspect parameter number (SPN), failure mode indicator (FMI) and occurrence count numbers are listed. Source addresses and DTC descriptions are presented in plain text. NOTE – The VID will display “Not Available” if a DTC description is not available for a particular fault.

When did the International Maxxforce Engine come out?

International MaxxForce engines built in 2013 and after will already come with the fix. An International dealer can determine whether pre-2013 engines have been updated with the improved parts.

How to check the DTC code on a truck?

Turn the key switch to the ACCESSORY position to view only previously active codes. Turn the key switch to the IGNITION position to view both active and previously active codes. Momentarily press the Cruise “ON” switch and the Cruise “Resume” switch at the same time. A gauge sweep will be performed on the gauges.

What are the International fault codes for Navistar trucks?

Fault Codes DTC of International Navistar Truck 311 EOT Engine Oil Temperature signal out-of-range low 312 EOT Engine Oil Temperature signal out-of-range high 313 EWPS Engine Oil Pressure below warning level

What is the DTC code for a truck?

INTERNATIONAL Truck Fault Codes DTC list DTC Circuit Condition Description 111 ECM No errors detected – flash code only 112 ECM PWR Electrical system voltage B+ out-of-range high 113 ECM PWR Electrical system voltage B+ out-of-range low 114 ECT Engine Coolant Temperature signal out-of-range low

What is the fault code for a truck?

316 EWPS Engine Coolant Temperature unable to reach commanded set point 331 ICP SYS Injection Control Pressure above system working range 332 ICP Injection Control Pressure above spec. with engine not running 333 ICP SYS Injection Control Pressure above/below desired level 334 ICP SYS ICP unable to achieve setpoint in time (poor performance)

What does FMI stand for in failure mode?

•“FMI” is the Failure Mode Indicator. This number represents the type of failure detected. Refer to Failure Mode Indicators (FMI) below for more information. 2 BODY CONTROLLER DIAGNOSTIC TROUBLE CODES (S08327) FAILURE MODE INDICATORS (FMI) DEFINITIONS

What does FMI stand for in truck diagnostics?

FMI” is the Failure Mode Indicator. This number represents the type of failure detected. Refer to Failure Mode Indicators (FMI) below for more information. Active” or “Previously Active” will be displayed to identify whether a fault is currently active or if the fault was previously active. OC” is the Occurrence Count.

What are the Flash codes for a PID 7?

not present SPN F FMI P PID/SID P PID/SID ID F FLASH CODES F 70 2 2 P PID 7 70 2 2111 P 70 1 19 S SID 2 234 2 2112 J 70 1 13 S SID 2 234 2 2112 J 70 1 19 S SID 2 234 2 2112 J

What’s the code for a DT 466E diesel truck?

We got couple of 05 International truck that has VGT problem. Code 152 (BAP signal out of range low). 354 (VGT control under duty cycle) and Body Controller – Remote Engine Speed Control #1 – Analog input #2 shorted to ground. Already replace BAP sensor, MAP sensor and VGT turbo.

What is the SPN code for a FMI PID?

SPN FMI PID/SID PID/SID ID FLASH CODE FAULT DESCRIPTION 132 7 PID 132 1213 Intake Air Throttle Valve Closure Detection- Positive Torque 132 14 PID 132 1213 Intake Air Throttle Valve Closure Detection -Braking Condition 132 14 PID 322 1635 HC-Doser Fuel Pressure Not Plausible 132 1 PID 322 1213 Air Mass Flow Too Low

What are symptoms of SPN 164 FMI 1?

SPN 164 FMI 1 (DTC 2335) ICP Unable to Build During Engine Cranking SPN 164 FMI 17 (DTC 3374)ICP Unable to build during test SPN 164 FMI 18 ICP below desired level SPN 164 FMI 13 ICP adaptation in-range fault SPN 8492 FMI 1 (DTC 3334)ICP Below desired SPN 1443 FMI 2 (DTC 2242) ICP adaptation in-range fault Observations or Concerns:

What are the International 4300 code numbers for 2004?

2004 international 4300 dt466 codes 613-14a and 2023-14p 2004 international 4300 dt466 codes 613-14a and 2023-14p – Answered by a verified Technician We use cookies to give you the best possible experience on our website.

What are the codes for a truck repair?

Truck Repair This answer was rated: 2004 international 4300 dt466 codes 613-14a and 2023-14p… 2004 international 4300 dt466 codes… 2004 international 4300 dt466 codes 613-14a and 2023-14p

When did my 2004 International 4400 get towed?

On February 28, 2006, I had my 2004 International 4400 (Vin # 1HTMKAAN24H592264) towed to Westrux International, located in Santa Fe Springs, CA, to be repaired. The vehicle had water coming out of the blow by tube (crankcase ventilation). This was noticed after driving the vehicle a mile down the road after stopping for a coffee.

What is the International fire code for 2012?

2012 INTERNATIONAL FIRE CODE (IFC) | ICC DIGITAL CODES ICC Digital Codes is the largest provider of model codes, custom codes and standards used worldwide to construct safe, sustainable, affordable and resilient structures. 2012 International Fire Code (IFC) | ICC Digital Codes

Where can I find the International Diagnostic Code?

International 3200, 4100, 4300, 4400, 7300, 7400, 7500, 7600, 7700, 8500, 8600 fault code list (PDF) – download The ability to display diagnostic trouble codes (DTC) is an optional feature. Codes may be displayed on either the gauge cluster or an optional vehicle information display (VID).

Where do I find the diagnostic trouble code?

What is the Cascadia Code for a 2017 Freightliner?

2017 freightliner Cascadia Detroit code spn 520363 fmi 5. I 2017 freightliner Cascadia Detroit code spn 520363 fmi 5 . I can seem to find this code on mitchel1… read more BrentR718 11 satisfied customers 2016 Freightliner Cascadia Detroit DD15 engine is reading

How many international MaxxForce fault codes are there?

If you are unfortunate enough to have one of these engines, you’ll want the detailed troubleshooting for them as they are nothing but problems on the over 250 codes you could possibly receive. You are commenting using your WordPress.com account. ( Log Out / Change ) You are commenting using your Google account.

Is the International MaxxForce DT 7.6L remanufactured engine available?

The remanufactured engine is available for the following 2007-2010 applications: Key updates and features to this engine include the installation of double thick tappet guides for strength and to ensure the tappets will not rotate and damage the camshaft lobes.

Who was the winner of the International 2014?

Cloud9 taking on Vici Gaming in the second round. The Grand Final of The International 2014 was between the Upper Bracket winner (Newbee) and the Lower Bracket winner (ViCi Gaming) for over 5 million dollars.

Who are the teams in the International 2014?

NewBee advances to the Upper Bracket, Invictus Gaming and Natus Vincere advances to the Lower Bracket, Titan is eliminated. The Upper Bracket consisted of two rounds to decide one of the two teams to dispute the 2014 Grand Final. The first round comprised two matches between the top two teams of Phase Two against the two winners of Phase Three.

Is there way to reset’check a / c’light on IH 4300?

The ‘Check A/C’ light is on in my 2005 4300 International. Is there a way to reset that light, or find out if there are any ‘codes’ as to why it’s on?

Are there two stored codes for 2023 14P?

I’m tossing 2023 14p it says there are 2 stored codes. It’s the same number twice proceeded by a 150 1 and 150 2 followed by 2023_14p I’m really looking for a full dtc list.

What does 613 14P and 614 14A mean?

It is usually tied to power windows or locks. If you have one or both, I suggest blowing air around the switches and get the moisture and/or dirt out of the switch. The switch could be starting to go bad or water got in from a rolled down window. 613 14p and the 614 14a have to do with the air box and thermistors.

Where to look up 2003 International fault codes?

613 14p and the 614 14a have to do with the air box and thermistors. Check your refrigerant levels and that all the controls in the air box change I have a international with a VT365 with 11 fault codes. where can I look them up? Click to expand…

Why do we need an exhaust pressure sensor?

This system mainly ensures that the engine receives adequate back pressure in order to function optimally. If the engine doesn’t receive appropriate back pressure it would result in clogging of excess exhaust gas and thereby reducing the performance of the engine and increasing the wear and tear of the moving parts of the engine. Hope this helps.

What happens when exhaust back pressure exceeds 10 kPa?

The Deutz study on a Euro I engine, Figure 2, showed a BSFC penalty of about 1.8% per 10 kPa back pressure increase when back pressure exceeded the back pressure limit for this engine [224]. Work in the 1970s found that fuel consumption for turbocharged engines increased by 1.5% for every 10 kPa increase in exhaust back pressure [1320].

Is there a limit to the back pressure of an engine?

All engines have a maximum allowable engine back pressure specified by the engine manufacturer. Operating the engine at excessive back pressure might invalidate the engine warranty.

What is the active code of 368 FMI 7?

Active code of 368 FMI 7, EGR driver mod./ECM2 comm. fault. The engine starts and runs, no power. What is the diag. procedure for this? Where is the EGR module located? Submitted: 7 years ago. Category: Medium and Heavy Trucks Andy : Hi there ! My name is XXXXX XXXXX I would like to try and help if I can ! 6H159844. New info.

Are there fault codes for heavy duty diesel trucks?

Discussion in ‘ Heavy Duty Diesel Truck Mechanics Forum ‘ started by tiggz_tiggz, Feb 6, 2018 . I have a truck with fault codes 525 fmi 6 Injector Dirver Circuit Fault *m* and 534 fmi 4 IDM- Relay Voltage Low. It doesnt show symptoms of a fault but it has the engine light on.

How to reset a / C on International trucks?

You can by pass each of the 2 thermistors with a 1500 ohm 1/2 watt resistor at the harness plug. Without Diamond Logic you can not monitor thermistor temp. so this is the way that you can quickly make sure that your thermistors are working. (after you remove battery cables for 5 minutes to reset) It works!

Short circuit to battery voltage, unit injector low side. Open circuit in actuator circuit. Mechanical system does not respond correctly. Resistance too high in injector. Ground. Slow PWM Valves Solenoid Valve. Power Take-Off 1 Solenoid Valve. Power Take-Off 2 Solenoid Valve. Brake, Counter Shaft

Where to find SPN code for 16 engine?

SPN codes description SPN Code SPN Name SPN Description 16 Engine Fuel Filter Differential Pressure (see also SPN 1382) Differential pressure measured across the fuel filter located between the fuel tank and the supply pump. See SPN 1382 and Figures SPN16_A & SPN16_B.

What is the SPN code for the fuel filter?

SPN Code: SPN Name: SPN Description: 16: Engine Fuel Filter Differential Pressure (see also SPN 1382) Differential pressure measured across the fuel filter located between the fuel tank and the supply pump. See SPN 1382 and Figures SPN16_A & SPN16_B. 18: Engine Fuel Pressure (Extended Range) 19: Engine Oil Pressure (Extended Range) 20

Why does my international 4300 DT466 not start?

If theres any air in it at all, it wont start. . The daytime running lights (DRL) and low beam headlights are inoperable. The highbeam headlights, markers and all other lights function properly. I have checked the fusebox in the engine compartment and above the glovebox and am unable to locate either a DRL/headlight, fuse or relay.

What to do if your International Truck won’t start?

International 4700 Truck Won’t Start, Ignition Switch or Gear Selector ? (Solved) – YouTube International 4700 Truck Won’t Start, Ignition Switch or Gear Selector ? (Solved) If playback doesn’t begin shortly, try restarting your device.

Where are the lights on my international 4300?

The highbeam headlights, markers and all other lights function properly. I have checked the fusebox in the engine compartment and above the glovebox and am unable to locate either a DRL/headlight, fuse or relay. We would love to have a troubleshooting guide, or schematic, but have been unable to locate one on the internet.

Why is there an error code 21 on my computer?

(Code 21) This error means that Windows is in the process of removing the device. However, the device has not yet been completely removed. This error code is temporary, and exists only during the attempts to query and then remove a device. You can either wait for Windows to finish removing the device or restart the computer.

Where can I find the International fault codes?

The switch could be starting to go bad or water got in from a rolled down window. 613 14p and the 614 14a have to do with the air box and thermistors. Check your refrigerant levels and that all the controls in the air box change I have a international with a VT365 with 11 fault codes. where can I look them up? Click to expand…

Is there a 2007 International VT365 engine for sale?

2007 INTERNATIONAL VT365 ENGINE ASSEMBLY MILEAGE: ODOMETER 158,802 CORE CHARGE: $2,500.00 USED – TESTED / INSPECTED: IF YOU WOULD LIKE TO SEE THE ENGINE RUN COPY AND PASTE THE LINK BELOW http… See More Details 2007 International VT365 used diesel engine for sale. 200 HP, Serial 1872922c1.

What kind of engine is in Ford International 4200?

The economical International VT 365 diesel engine is engineered to maximize cost efficiency with features that optimize performance, reduce emissions and enhance driveability, fuel economy, reliability and serviceability. Available as the exclusive engine for the International 4200, the VT 365 brings real value to your operation.

Are there any problems with the Ford VT365?

In 2003 there were reported field problems with the injectors. This condition was resolved in 2004. Power Stroke reliability and owner satisfaction is actually very close to its high point. The 6.0L Power Stroke continued to gain in market share throughout its life cycle.

What is the code for a Freightliner truck?

Freightliner began using a new FT1001-FT3000 code series in 2003. Kenworth and Peterbilt began using a P0001-P1500 series in 2011 and International trucks began using a new I001-I1680 in 2017. Some cab forward (CF) truck models are actually rebadged import models and do not use Strattec key blanks or key codes.

What’s the new Strattec code for a truck?

Fortunately many large trucks continue to use the same Strattec codes year after year but there are some exceptions. Freightliner began using a new FT1001-FT3000 code series in 2003. Kenworth and Peterbilt began using a P0001-P1500 series in 2011 and International trucks began using a new I001-I1680 in 2017.

What are the trouble codes for diesel engines?

International DT466E trouble codes. 1. DTC: 222, SPN: 247, FMI: 2 Break Switch Circuit Fault; 2. DTC: 353, SPN: 27, FMI: 5 VGT Over Duty Cycle;

How does the International Truck diagnostic scanner work?

Service and Maintain Your International Truck On The Road. The International Truck diagnostic scanner enables you to read and erase the fault codes that relate to the check engine light on your truck. It works on all International Trucks listed in the drop down box above.

When is DTC 368 active code of FMI 7?

One of the CAN 2 datalink wires (CAN 2 positive or negative) is open, short to ground, or short to power exists. When DTC 368 is active the amber ENGINE lamp is illuminated. The egr module is the smallest control module mounted in front of the IDM which in turn is mounted in front of the ECM .

Where do I find the T444E code on my school bus?

Call your local IH dealer and ask them for a list of codes and get yourself a copy of the engine diagnostic manual. You will probably need it later. start with the first code,check cables at battery,there are 2 smaller cables attached with inline fuses,they get corroded.

Where to find DT 466E trouble code list?

You can go to this site: https://evalue.internationaldelivers.com/service/bodybuilder/general/engine/eges270_FC.xml and click on the actual code (DTC) to access some decent diagnosis pages! Or scroll down for a quick reference. One word of *CAUTION*

What should I do if my VT365 has no power?

Wrench. Diagnostic Tech. If so, just monitor the can lines to see if they are talking to each other and check all sensor grounds. if all that is ok, then check circuit IDM relay vbat, that needs to be checked out. I think my bad english thinks this is what you mean by clean power.

Where can I find the engine diagnostic codes?

Lights, HVAC system etc. the engine diagnostic codes are retrieved by turning the key on and holding the cruise set and on button down. You then count and record the flashes of the Amber engine light. They are 3 digit codes. The code list is in the stickies I believe. A bit of a PItA but it works.

What is the code for the ABS light?

Pulling the code will point you to the malfuntion…Bendix makes a LED code reader/clearing device, looks a bit like a electronic flasher. P/N 801869 and the cable for my ’07 IC-CE is a P/N 801872. About $100 for both.

What does OC stand for in truck diagnostics?

OC” is the Occurrence Count. This number represents the number of times a fault has gone from previously active to active. “SA” is the Source Address. This number identif es the module reporting the fault. Refer to Source Addresses (SA) for more information.

What kind of engine does the Navistar 4400 have?

The 4400 was also produced in a semitractor; sitting 4 inches higher than the chassis truck, the 4400 tractor was the only version offered with the DT570 engine as an option. For 2008, coinciding with the introduction of the International ProStar and International LoneStar, Navistar revised the branding of its truck model lines.

What is the fault code for a Volvo truck?

Reset ABS Faults, Body Controller Faults and more. 1 Volvo Link System Faults (MID 142) Fault Code Description FMI MID 142 PID 155 Input 1-4. 2 Vehicle ECU Faults (MID 144) 3 Climate Control Faults (MID 146) 4 Light Control Module Faults (MID 216) 5 Gear Selector Module Faults (MID 223) More items

What are the fault codes for Cummins ISL9?

Intake Manifold 1 Pressure – Data Valid But Below Normal Operating Range – Moderately Severe Level Intake Manifold 1 Pressure – Data Valid But Below Normal Operating Range – Moderately Severe Level Accelerator Pedal or Lever Position Sensor 1 Circuit – Voltage Above Normal or Shorted to High Source

What is DTC code for VCT solenoid valve?

Open or short in the VCT circuit Open VPWR circuit Open or short in the VCT solenoid valve Diagnostic Aids: This DTC is a circuit check. Testing should include the harness and solenoid coil. Application Key On Engine Off Key On Engine Running Continuous Memory All GO to Pinpoint Test HK .

Why does my international 4300 check a / C light?

Turns out it was the motor that switches the flaps in the dash from defrost to floor and vent now why that shuts the compressor down i have no idea but a $34.00 motor did the trick.

What makes an International Transtar 8600 a Transtar?

2016 International 8600 SBA Air Conditioning Power Steering Heated Mirrors Aluminum Tanks Power Windows Power Mirrors Power Door Locks Tilt/Telescopic Wheel Dual High-Back Se… See More Details

What’s the problem with my international AC system?

Discussion in ‘ International Forum ‘ started by IanG, Sep 26, 2015 . 02’ 9200i, all new ac system, worked great and now have lost electric power all way from the compressor to the relay behind glove box. All of the other relays and fuses have power and are working except for this one.

What causes a check a / C light on error code?

This Diagnostic code is logged when the ESC senses that the system refrigerant charge is too low to allow safe operation. The code may be caused by any of the following: (1) Faulty Thermistor Circuit (2) Refrigerant Leak (3) Improperly Charged System The ESC prevents A/C compressor operation.

How to reset a / C on International trucks-MHH auto?

u can hook battery cables for a few minutes and reset code, if there is an ac codd that comes back the ac is inoperable. diamond logic builder is the right way to clear code. and to diagnose ac system. This Work fine for me. Resetting Prostar AC Faults. this video explain very good Rawze. This work on International 2011 prostar truck tested.

Why is my dump valve blinking on my International Truck?

The body controler on these trucks can be a bish, International ziptied the wires to tight at the connection for it, it can actually depin the body controller and start having random and odd things happen as the connection jiggles. Might want to check it I just had mine replaced because of it.

When do air bags fill, the switch blinks?

Discussion in ‘ International Forum ‘ started by Smellfunny, Nov 11, 2015 . Air bags will not fill with air. When the switch is flipped up it just blinks. Every month 400 people find a job with the help of TruckersReport.

How to identify which injector by Sid number?

Identify which injector by the SID number. Injector activated and faulty voltage in injector low side. • Short circuit to battery voltage on the pin on the respective injector’s low voltage side. (EMS2 pin: 36, 40, 44, 48, 52, 56 and 12, 16, 20, 24, 28, 32) • Short circuit between high voltage and low voltage sides.

Where is the 11th digit on an international truck?

The 11th digit indicates the plant location. International trucks were built at several different locations. Some of the 11th digit codes are G for Fort Wayne, Indiana; H for Springfield, Illinois; C for Chatham, Ontario; Y for San Leandro, California; and L for Bridgeport, Connecticut.

How to read the VIN number on an international truck?

The first character indicates the country where the truck was manufactured. The number 1 is for USA; 2 is for Canada. All Canadian vehicles were manufactured at the plant in Chatham, Ontario. The second character indicates the manufacturer of the vehicle. H is for International Harvester.

Where is the VIN number on a Kenworth Truck?

Some of the 11th digit codes are G for Fort Wayne, Indiana; H for Springfield, Illinois; C for Chatham, Ontario; Y for San Leandro, California; and L for Bridgeport, Connecticut. The last six digits designate the serial number and production sequence of the vehicle. Where Is the VIN Located on a Kenworth

What does fault code 2359 EGR differential sensor mean?

Basically that sensor is used to measure egr flow into the intake of the engine. This code is set when the ECM is seeing flow readings that it is not expecting giving the current engine operating conditions. Some common problems are carbon plugging in the sensing tubes, and/or carbon plugging where…

What is code 152 on DT 466E diesel engine?

Code 152 (BAP signal out of range low). 354 (VGT control under duty cycle) and Body Controller – Remote Engine Speed Control #1 – Analog input #2 shorted to ground. Already replace BAP sensor, MAP sensor and VGT turbo. Already check of short to ground on all wiring connected to BAP and MAP sensors.

What kind of VGT code does Cummins ISL9 have?

2015 freightliner m2 series 106. Has a cumins isb 6.7 cm2350 2015 freightliner m2 series 106. Has a cumins isb 6.7 cm2350 6cyl. I have 2 vgt actuator codes my software wont let me look up.

Are there any non-contact idle validation sensors?

The new sensors listed below contain “non-contact” hall-effect idle validation sensors. This replaces the open/closed IVS switches in the old sensors . As a result of this new design, the normal resistance measurements performed for the potentiometer and idle validation switch on the previous “contact’ sensor are no longer applicable.

What does the idle validation switch ( IVs ) do?

The Idle Validation Switch (IVS) provides 0 or 12 Volts to the ECM as a signal to verify the pedal idle position.

How much Freon does an international 4300 hold?

PUT TWO NEW THERMISTERS IN IT,part #3622764c3 and if its a two door cab it should hold 2 lbs of freon and if its a extra cab it should hold 2.25 lbs.hope this helps.

What should the high pressure switch be on an international 4300?

Sounds like the high pressure switch is bad. The high side should go up close to 300psi before it cuts the compressor off. The normal opperating range for the high side is 180-250 and your not getting that.

Who are the satisfied customers of 05 international 4300?

Vocational, Technical or Trade Scho 3,777 satisfied customers 05 International 4300 DT466 started up and then died I have a 05 international 4300]

Is the C13 a bad engine or a good engine?

LTL9000 said: ↑. From my experience, the pre-dpf c-13 is a really good engine. good power and very little issues. early 2000’s c12’s were also very good in my opinion as well.

What kind of truck is the International 7300?

2017 International 7300 extended cab Dump/Salter, Cummins ISB 325 Hp Diesel, Allison 3500 Series RDS Auto, A/C, PW, PDL, Chrome Pkg, AIR BRAKES, 37000 lbs Gvw, FA 14, RA 23, Air ride susp, Locking See More Details

What is the start code on a 2008 International 4300?

No start code spn 51 fmi 11 comes active when cranking. Codes spn 2798 fmi 4 and 3 spn 2797 fmi 3and 4 … read more Auto Mechanics 1&2/diesel… Vocational, Technical or Tra… 2008 International 4300 with maxforce DT need help understanding the relative compression test.

How many miles does an International WorkStar 7300 have?

Just in on consignment is this 2008 International Workstar 7300 Crane/Service Truck. It has 132,679 miles and features a Maxxforce DT engine. This truck just came out of the local IH dealer’s shop

Navigation