Are there transmission problems in a 2004 Chevy Silverado?
These trucks are getting older, and it is hitting the point that your 2004 Silverado may be having transmission problems. Below, you’ll find a ton of troubleshooting your transmission problems. The 2004 Silverado was a carryover from the 2003 model year. It is necessary to determine what kind of transmission is in the truck.
Can a Chevy Silverado go from 1st to 4th shift?
Transmission is in Limp Home Mode or has no electrical power. Also, PCM has lots of error codes. No 1st or 4th, shift 2nd to 3rd by itself when put in D or OD and locks converter: Goes into gear but sluggish like brakes are on, can manually shift to 2nd to get moving, then put in OD and truck shift 3rd as well as 4th are OK.
What causes a hard shift on a Silverado?
A 12 Hz electrical feedback from the charging circuit may be affecting the transmission pressure control solenoid, causing a fluctuation of the line pressure within the transmission. Throttle position is less than 15 percent. Engine coolant and transmission fluid are at full operating temperature.
Can a shifting solenoid be replaced on a Chevy Silverado?
A shifting solenoid is pretty easy to replace; although, you have to remove the transmission pan to change them. A general trouble code may show that the transmission is slipping, but not pinpoint what the issue may be. Figure 2.
What causes a Chevy transmission to not shift?
Low transmission fluid level. Chevy transmission won’t shift, stuck in 1st gear or limp mode – Speedometer may also display zero at all times. It could be internal transmission failure, low transmission fluid, or faulty Vehicle Speed Sensor (VSS sensor).
How can I fix a Chevy transmission problem?
Locate the diagnostic port under the dashboard (driver’s side) and plug in your scanner. Turn on the ignition and your scanner. Select Chevy from the main menu, then select your model. Select Control Units, then select Automatic Transmission. All codes that show as CURRENT should be fixed.