What engine came in the Bronco 2?
| Ford Bronco II | |
|---|---|
| Powertrain | |
| Engine | 2.8 L Cologne V6 2.9 L Cologne V6 2.3 L Mitsubishi 4D55T turbodiesel I4 |
| Transmission | Manual: 4-speed Mazda TK4 5-speed Mazda TK5 5-speed Mazda M5OD-R1 5-speed Mitsubishi FM145 5-speed Mitsubishi FM146 Automatic: 3-speed C5 4-speed A4LD |
| Dimensions |
What engine does a 1989 Ford Bronco have?
1989 Ford Bronco 5.8L EFi V-8 automatic (156.5 kW / 213 PS / 210 hp) (since mid-year 1988 for North America U.S.) specs review.
How much horsepower does a 1989 Bronco 2 have?
Power
| Inline 4 | |
|---|---|
| Displacement : | 2294 cc | 140.0 cu in. | 2.3 L. |
| Power : | 88 HP (64.768 KW) @ 3800 RPM |
| Torque : | 130 Ft-Lbs (176 NM) @ 2800 RPM |
| Bore : | 96.0 mm | 3.78 in. |
What engine did the old Bronco have?
The four-wheel-drive ’66 Bronco had a 92-inch wheelbase and was 152.1 inches long. It was powered by a solid-lifter version of Ford’s proven 170-cubic-inch overhead-valve six-cylinder engine that developed 105 horsepower at 4,400 rpm.
How much is a 1967 Ford Bronco worth?
In 1967, a 289-cubic-inch V-8 engine became optionally available, and with more power, the price goes up. The 289-equipped Bronco wagon is worth an average of $38,100, says Hagerty, while Bronco pickups average $33,900, and the Bronco roadsters average $36,500.
What is the biggest Ford Bronco?
The larger Ford Bronco SUV measures 173.7-190.5″ L x 75.9-79.3″ W x 71.9-75.2″ H, depending on the configuration. There are two-door and four-door versions, plus a removable top option.
What kind of engine does a 1989 Ford Bronco have?
Ford Bronco II 4WD 2.9L EFi V-6 5-speed O/D (man. 5) , model year 1989, version for North America U.S. gasoline (petrol) engine with displacement: 2933 cm3 / 178.6 cui, advertised power: 104.5 kW / 140 hp / 142 PS ( SAE net ), torque: 231 Nm / 170 lb-ft, more data: 1989 Ford Bronco II 4WD 2.9L EFi V-6 5-speed O/D (man.
When did the Ford Bronco II come out?
The 1989 Bronco II was short-lived as it was built for little less than a year when production ended in early 1990. It was later succeeded by the larger Ford Explorer for 1991. The ’89 to ’90 Bronco IIs are perhaps one of the rarest Ford vehicles ever made.
How much power does a Bronco 2.9L have?
The increase in power mathematically would be roughly 2-4% per point in compression increased so that being said with the 2.9L at 8.5:1 increasing the compression with those pistons to 10.5:1 you would yield a maximum of 8% increase in power. The 2.9L Bronco II’s have a Speed Density fuel injection system.
What causes a Ford Bronco II engine to stall?
Replace with Fel Pro “Rubber” or Fel Pro “Blue” and leaks should be taken care of. Your Ranger/Bronco II is stalling/dieing or sputtering when hot but runs when it cools off. This can be caused by a faulty TFI and the biggest culprits are heat. Another culprit can be a wire grounding out.