How do you add transmission fluid to a 2002 Mercury Mountaineer?
How to Add Transmission Fluid to a Mountaineer
- Locate the transmission of the Mountaineer.
- Remove the plug by unscrewing it with your hand.
- Place a fluid level tube into the hole and attach a small funnel to the end of the tube.
- Pour the transmission fluid into the funnel until the compartment is full.
How do I check my transmission fluid on a 2002 Mercury Mountaineer?
Hold the larger drain plug with a wrench and remove the small (center) fluid level indicating plug using a 3/16 inch Allen key.
- Allow the fluid to drain. Wait approximately one minute.
- If no fluid comes out of the hole, fluid will need to be added to continue with this procedure.
How do you add transmission fluid to a Mercury Mountaineer?
It usually involves simply removing a dipstick, inserting a funnel and pouring in the the fluid. Adding transmission fluid to a Mercury Mountaineer is a bit different, however. A Mountaineer does not have a dipstick on the transmission; instead, it has a plug that releases fluid and also allows operators to add fluid.
Why do I need to take drip pan out of 2002 Mercury Mountaineer?
Remove the drip pan out from under the 2002 Mercury Mountaineer. The purpose of cranking the engine and shifting through all of the gears is to get the transmission fluid into all areas of the transmission. This will most likely lower the fluid level at the Torx fill hole, thus the need to refill the transmission pan with more fluid.
Where is the fluid catch plug on a Mercury Mountaineer?
Park the 2002 Mercury Mountaineer on a level location and set the emergency brake. Crawl under the driver side of the Mountaineer and locate the two-part drain plug on the bottom side of the transmission pan. The hex head drain plug has a smaller Torx plug in the center of the big plug. Place the fluid catch pan under the area of the drain plug.
Why does Mercury Mountaineer not have a dipstick?
The 2002 Mercury Mountaineer comes with a transmission that does not have a dipstick. The fluid inside of the transmission protects all of the moving gears and seals. The transmission fluid bonds to the gears to prevent heat friction. The transmission fluid also bonds to the seals to keep the seals soft…