How do you change the transmission fluid on a 2002 Mercury Mountaineer?
Set the Torx plug in a safe area near where you are working. Insert the end of the small plastic hose into the center Torx plug hole. Pump the Mercon automatic transmission fluid into the pan with the fluid pump until the fluid begins to flow out of the fill hole. Remove the tube from the fill hole.
How much should it cost to change transmission fluid?
It depends on where you take it. At a mechanics shop or dealer, the price will likely range between $80 to $250. However, if you’re willing and able to do it yourself, it should fall between $50-$100.
Does a 2005 Mercury Mountaineer have a transmission dipstick?
A Mountaineer does not have a dipstick on the transmission; instead, it has a plug that releases fluid and also allows operators to add fluid. The plug is located on the side of the transmission and can be difficult to reach.
How do you add transmission fluid to a Mercury Mountaineer?
It usually involves simply removing a dipstick, inserting a funnel and pouring in the the fluid. Adding transmission fluid to a Mercury Mountaineer is a bit different, however. A Mountaineer does not have a dipstick on the transmission; instead, it has a plug that releases fluid and also allows operators to add fluid.
Why do I need to take drip pan out of 2002 Mercury Mountaineer?
Remove the drip pan out from under the 2002 Mercury Mountaineer. The purpose of cranking the engine and shifting through all of the gears is to get the transmission fluid into all areas of the transmission. This will most likely lower the fluid level at the Torx fill hole, thus the need to refill the transmission pan with more fluid.
How much fluid do you put in a mountaineer?
Pour the transmission fluid into the funnel until the compartment is full. A completely dry Mountaineer will generally take around five quarts of fluid. Replace the plug and start the engine. Let the engine idle for about five minutes to allow the fluid to fully lubricate the transmission.
Where is the fluid level plug on a mountaineer?
A Mountaineer does not have a dipstick on the transmission; instead, it has a plug that releases fluid and also allows operators to add fluid. The plug is located on the side of the transmission and can be difficult to reach. Purchasing a fluid level tube and a small funnel from your local auto parts store can make the job much easier.