Where is trailer brake controller fuse?
chevy brake controller install, no tow package. Now, under the hood, is the main fuse box.
Where does a brake controller plug into?
Using a vehicle-specific wiring harness, plug the brake controller into the vehicle. One end of the wiring harness plugs into the vehicle’s factory harness under the dash, and the other end plugs into the brake controller. The location of your vehicle’s factory wiring harness may vary.
Does trailer brake controller have a fuse?
There’s already a red wire installed for the brake controller. It’s right behind the emergency brake pedal. If this wire does not have power then you will need to connect the other end to the stud on your fuse box which can be seen in the attached photo.
Where is the pin on an electric brake controller?
The electric brake pin should be in the 5 o’clock position. If no power is present, proceed to Method 3. With the trailer connected, check for power on the electric brake wire coming out of the trailer’s 7-Way plug.
Why is my brake controller not connecting to the ground?
Brake controller loses connection to battery ground. Ground wire was not connected to negative battery terminal, ground area does not have solid connection to ground. Adapter wiring does not match OEM connector on vehicle. Ground connection to negative battery terminal is loose.
Can a brake controller be connected to a positive battery?
Verify that the white brake controller wire (ground function) is connected to the negative battery terminal. Verify that the black brake controller wire (12V power function) is connected to the positive battery terminal with a 20 or 30 amp circuit breaker installed in line.
Where is the fuse number on a Jeep Grand Cherokee?
A description of each fuse and component may be stamped on the inside cover, otherwise, the cavity number of each fuse is stamped on the inside cover that corresponds to the following chart.