Why is my AC not working on my 1992 Toyota Camry?
When working on a 1992 Toyota Camry with the 4 cyl engine. The AC system was working fine and I drove it to the gas station and upon starting it to go home the AC just did not work at all. I used some common sense; I knew that when the compressor or other parts of the AC system go out, you will at the least get hot air coming out of the vents.
Where is the blower motor on a Toyota Camry?
Get to the blower motor pretty easily in a Toyota Camry. Unscrew and remove the glove box entirely. The blower motor is directly behind it. Unplug the electrical connection, unscrew it and remove it. Pry off the trim panels surrounding the climate controls and radio to gain access to the control panel.
When did the blower on my Toyota stop working?
Pirates here at the dealership wanted $169.0 😆 Yeah NOT. Blower stopped working last Thursday, It came back on Friday after I wiggled the blower motor resistor, went back out Saturday. It doesn’t work on any speed.
What happens when you turn on the a / C in a Camry?
If you start the car and turn on the A/C, the magnetic clutch should engage and start turning the compressor pulley. If it does not, then there may be something wrong with the relay. Take the relay out and hit it a couple times. Then plug it back in.
Where is the fuse panel on a Toyota Camry?
If the replaced fuse blows again, have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. The fuse panel is located behind the coin tray on the driver’s side of the dashboard. Engine Coolant Temp.
Where are the fuses on a Toyota blower?
AC fuse is on top with a 10A rating, heater/blower fuse is in the middle with a 40A rating, and the heater/blower relay is at the bottom. Any questions? Yes, today I found the 10 Amp. and the 40 Amp. fuses, they are OK. I can’t check the relay, I need to replace it to be sure is the bad relay that the blower not working?
What to do if Your Fuse has blown on your Toyota Aygo?
Turn the engine switch off (with a smart key system – turn the “ENGINE START STOP” switch off) and turn off all electrical accessories. Open the fuse box cover. See diagrams below for details about which fuse to check. Remove the fuse. Check if the fuse is blown – if the thin wire inside is broken, the fuse has blown.