How do you loosen the alternator belt?
How to Loosen an Alternator Belt
- Open and secure your car’s hood.
- Locate the alternator.
- Look for the three bolts that secure the alternator.
- Loosen the front and rear bolts attached to the alternator and engine using a suitably sized wrench.
- Loosen the bolt attached to the adjustable bracket.
- Remove the wrenches.
How long should a alternator belt last?
How long should an alternator belt last? A simple rule of thumb for the lifespan of an alternator belt is around 3–4 years. It should be inspected at your vehicle service or whenever you have an oil change.
How do you replace a Toyota 4Runner accessory drive belt?
Use any combination of wrenches and ratchets it takes to loosen the bolts and nuts. From the top, loosen the alternator pivot bolt with a 14mm wrench or socket. Figure 6. Alternator pivot bolt. From the bottom, loosen the nut circled in red with a 14mm. The adjuster bolt is also 14mm and needs to be loosened quite a bit so the belt will come off.
What kind of alternator does a Toyota 4Runner have?
The Toyota 4Runner model vehicles come equipped with two different types of alternator belts. The first belt is a V-belt that controls each engine accessory separately.
Is there a way to remove the alternator belt?
Much easier to do it this way. First belt you want to remove is the alternator belt. To do so, you need to loosen 2 bolts, as pictured below. This will allow the alternator to swivel down enough to let you slip the belt off. After you have it free, easiest way is to just cut it in half and remove it.
How do you loosen a pivot bolt on an alternator?
Loosen the pivot bolt with the ratchet and a socket. Locate the adjustment bracket on the top of the alternator. Loosen the locking bolt in the center of the adjustment bracket slide with the ratchet and a socket. Locate the adjustment bolt at the end of the bracket. Turn the bolt counterclockwise to loosen the belt.