Why does my truck just click when I try to start it?
It might be a battery or alternator problem. A rapid clicking noise when trying to start your car could mean there’s something wrong within the electrical system. Perhaps your battery’s dead, or your alternator, which charges the battery, isn’t working correctly. You may need to replace your alternator or battery.
What does a clicking relay mean?
Clicking noise in your car’s fuse box is caused by a relay that is turning on and off rapidly. This can be caused by a computer failure, resistance in the ground wire for the control side of the relay or high resistance in the power supply to the control side of the relay.
Why does my 2007 tundra tundra not start?
My 2007 Tundra Tundra stopped on me while driving. All lights was still on and ac, power steering lost and hard brakes, accelerater pedal went to the floor. Now it only cranks not starting. I Changed ( spark plugs, coils was cracked, battery, battery terminals, fuel pump) but only crank no start. Fuel is in one line not two. I need some help.
Why does the accelerator stick on my Toyota Tundra?
Sticking Accelerator Pedal (2007-2010 Models Only): Many Tundra owners reported having experienced unintended acceleration. After investigating this issue, Toyota found that the sliding surface of the friction level was able to became smooth, creating condensation and causing the accelerator pedal to stick.
Why is my Toyota Tundra not shifting to 4HI?
The symptoms of the lights coming on and not shifting to 4hi or lo are the truck being in “limp” mode. Its what the computer does to allow you to keep running the truck to get it to a place to be worked on without letting itself be over-worked.
What should the pressure be on a Toyota Tundra?
WAG is pressure should be around 40psi. There are other fuses to check. Start with the highest amperage ones, 30 A it think, and go from there. I had this issue on a 2010 and it was because I blew a fuse for the trailer harness while on a 500 mile trip.