Do you need to reset tire pressure monitoring?
If your tire pressure light stays on even after you’ve added the correct amount of air to the tires, you’ll need to reset it. If your TPMS light remains on after inflating the tires to the proper pressure, try these steps: Drive the car at 50 mph for about 10 minutes.
How do you turn off the low tire pressure light on a Toyota Tacoma?
How to Fix the Low Tire Pressure Light on My Toyota Tacoma
- Park the vehicle on a level surface and turn it off.
- Start the vehicle.
- Press and hold the TPMS reset button, located below and to the left of the steering wheel.
- Wait an additional five minutes with the vehicle running, then shut it off.
How do you turn off the TPMS light on a Toyota Tacoma?
Look for the TPMS reset button and press the button until the tire pressure indicator Blinks slowly three times. Wait for several minutes with the engine switch in the “ON” position, to allow the system to record each tire’s pressure, then turn the engine off. Done!
Where is the tire pressure sensor reset button?
Press and hold the TPMS reset button, located below the steering column. Release the TPMS reset button after the tire pressure light blinks on and off three times. Leave the ignition turned on for at least five minutes so the computer has enough time to read all of the pressure sensors. The light turns off after the reset process completes.
How to reset the tire pressure for a 2006 Toyota Tacoma?
Step 1 Park the Tacoma on a level area. Inspect the air pressure in each of the tires with the tire pressure gauge. Insert the key into the ignition. Press and hold the TPMS reset button, located below the steering column. Release the TPMS reset button after the tire pressure light blinks on and off three times.
How to reset tire pressure warning light on Toyota Camry?
3. Turn the intelligent tester ON and navigate to the “TIREPRESS” option using the on-screen prompts. 4. Within 30 seconds of turning the ignition ON, press and hold the tire pressure warning reset switch (located at left side of glove compartment opening) until the tire pressure warning light blinks 3 times at one-second intervals. See Fig. 4. 5.
Where is the reset button on a Toyota TPMS?
Apply the parking brake and turn the ignition to ON position with the engine OFF (not the ACC position). Hold down pressure warning reset switch (located under the steering wheel or in glove box) (insert image of the reset switch) until the TPMS telltale light blinks three (3) times.