Should wheel hubs be replaced in pairs?
A. As long as the other wheel bearing is not making noise and play is still within specifications, it should remain in service. …
Are left and right hubs the same?
The left and right wheel bearings are the same part numbers. There is a difference in hubs for 2 wheel drive and 4 wheel drive vehicles.
Are front and rear wheel hubs the same?
Every wheel hub is, in some way, connected to a wheel bearing. On cars made before 1997, front wheel drive cars use wheel hub assemblies at each wheel and rear wheel drive vehicles use two individual bearings and seals in both front wheels. A major difference between the two is how they are assembled.
How do you diagnose a bad wheel hub?
Signs of Hub Damage During Normal Driving
- Snapping, clicking or popping noises when cornering or making sharp turns.
- Grinding noise when the vehicle is moving.
- Knocking or clunking sensation from the vehicle.
- Wheel vibration and/or wobble.
- Poor steering control.
- Shudder, shimmy or vibration at a constant speed.
How do you replace the front wheel hub on a Prius?
This job required a ratchet with a 10mm socket and some rubber gloves. Also, once you unhook the battery, don’t close the trunk as you can’t open it without the power. Loosen the lug nuts on the front wheels. Jack up the car and place jackstands.
How often should you replace wheel bearings on a Prius?
Our 2008 Prius (Gen 2) was making a loud whining noise characteristic of bad wheel bearings at 80,000 miles, so we took it to the local Toyota dealership to have them check it out. They ended up suggesting several pieces of maintenance: An invertor flush, which is recommended every 100,000 miles or 6 years. Our Prius is 6.5 years old. $129
Why is my Toyota Prius making a whining noise?
New Member I am new posting to the forum, but have been reading for years. Our 2008 Prius (Gen 2) was making a loud whining noise characteristic of bad wheel bearings at 80,000 miles, so we took it to the local Toyota dealership to have them check it out. They ended up suggesting several pieces of maintenance:
What to do when your front wheel bearing hub is replaced?
Make sure to mark the brake dust shield so you know which side faces out. The machine shop can also clean up the erosion and dust they are bound to find between the knuckle and hub. Clean up the bolts and nuts you have pulled out in this time. Re-assemble the NEW hub, brake dust shield, and knuckle.