How to replace the water pump in a Toyota Tacoma?
Loosen and remove the retaining bolts to the water pump and remove the water pump. Clean the gasket mounting surfaces and install a new gasket to the water pump before installing the water pump.
What happens if you drain the radiator in a Toyota Tacoma?
Disconnecting the negative battery cable may reset the on-board computer system or parts of the computer system, so be aware that you may have to reset certain settings. Never attempt to drain the radiator when the engine to your Toyota Tacoma is hot. The steam and the hot coolant within the radiator can cause serious burns.
What to do before installing a water pump?
Clean the gasket mounting surfaces and install a new gasket to the water pump before installing the water pump. Tighten all the short bolts to 80 inch pounds and the long bolts to 17 foot pounds. Install the belt tensioner assembly then continue installing the rest of the components in reverse order.
How big is the belt tensioner on a Toyota Tacoma?
Tighten all short bolts to 15 foot pounds and the short bolts to 80 inch pounds. Reinstall the belt tensioner assembly, tightening the first bolt to 30 foot pounds, the second to 16 foot pounds and the last to 32 foot pounds.
Where is the water pump on a truck?
Assess the project. Cars and trucks vary greatly, depending on the engine and accessories it is equipped with. You should find the water pump, then look at how much equipment must be removed to access it. Here are some things to look at to help you identify your water pump. Many water pumps have the cooling fan mounted on the front.
Where can I get a replacement water pump?
Wobble or loose play in the front shaft of the water pump. Locate a source for a replacement for your water pump. Auto parts stores sell rebuilt or new replacement parts, but some may require special order and may take several days for the part to arrive. Some exotic vehicles may require purchasing or ordering a dealer only replacement part.