Can you replace just one lower control arm?

Can you replace just one lower control arm?

It is not necessary to replace both lower or both upper control arms if one is bad, but often they wear out at roughly the same mileage. If one control arm is bad and the other is on its way, it makes sense to replace both arms at once. This way, you only need to do the wheel alignment once.

How do I reinstall lower control arms?

How to Remove and Replace Lower Control Arms or Bushings

  1. There is a video of this job being done at the bottom of this guide.
  2. Release the Ball Joint.
  3. Remove the Sway Bar Link.
  4. Remove the Control Mounting Bolts.
  5. Remove the Lower Control Arm.
  6. Replace the Bushings.
  7. Reinstall the Lower Control Arm.

How often should you replace lower control arms?

Over time, the control arm assembly can become worn or bent. These assemblies normally wear out between 90,000 and 100,000 miles. They can wear out faster if you go over a large pothole or are involved in a car accident. Various parts of the assembly may wear out as well, such as the bushings or ball joints.

Do you have to replace both control arms?

Control arm replacement It’s not necessary to replace both, left and right arms if one is bad. Often, however, if one arm is worn out, it’s reasonable to expect that another control arm will likely need replacement soon. In this case, it’s makes more sense to replace control arms on both sides at the same time.

Are control arms hard to replace?

Control arm replacement can be difficult—especially if the vehicle’s suspension is rusted and corroded. Separating the ball joint from the steering knuckle can be tricky, too, if you’ve never done the job before. And, oh yeah, you’ll want to get your car’s alignment checked after replacing the control arm.

What are the symptoms of a bad lower control arm?

Below are five common signs that your vehicle’s control arms need replacing.

  • #1) Clunking Noise. One of the first things you’ll notice when one or more of your vehicle’s control arms goes bad is a clunking noise.
  • #2) Vehicle Pulling to the Side.
  • #3) Uneven Tread Wear.
  • #4) Vibrations When Driving.
  • #5) Visual Damage.

How much does a control arm cost to replace?

If just a single control arm needs replacing, it will typically cost between $50 and $100. If the damage is to the whole system, you would need to purchase a control arm kit for around $100 to $250 . Ask a certified auto mechanic for an accurate assessment of the problem and the full cost including labor.


Posted In Q&A