How much torque does a 4AGE have?
SPEC SHEET
| ENGINE | |
|---|---|
| Bore & Stroke (mm): | 81mm x 77mm |
| Peak Horsepower (@ RPM): | 112 hp @ 6,600 RPM, 157 hp @ 7,400 RPM (20V), 167 hp @ 7,400 RPM (4A-GZE) |
| Peak Torque (@ RPM): | 97 lb-ft @ 4,800 RPM, 119 lb-ft @ 5,600 RPM (20V), 155 lb-ft @ 5,600 RPM (4A-GZE) |
| Pistons/Compression Ratio: | 9.4:1, 10.3:1, 10.5:1 (20V) |
How much power can a 4AGE handle?
most experienced people say that maximum amount of usable hp you should have on a fwd car is about 200-250 hp. after that you need to start doing crazy stuff to keep from dying. any more than 250hp you won’t really be able to drive it.
How much HP does a 4AGE 20V have?
After all that upgrading, the 4AGE capacity is 160 horsepower at 7,400 rpm. with a torque of 162 Nm (119 lb•ft) at 5,200 rpm. 4A-GE Gen 5 20V “Black Top” (1995 – 1998) is the last 4AGE-type. That engine has enlarged throttle body.
Is 4AGE carbureted?
The fuel injected 4A-FE is the successor of the carbureted 4A-F. It was manufactured between 1987–2001. Toyota designed this engine with fuel economy in mind. The second generation engine was produced from 1992–1998 (1993–1996 in the US).
Do you have to torque head bolts?
In short, at least here in 2020, the answer is no, you don’t have to retorque head fasteners, maybe. If you catch any seeping you can try retorquing the bolts, but if anything gets between the gasket and the block or head surface it may be too late to save yourself from installing a new head gasket.
What are the torque specs on a Toyota 4AGE?
Oh yeah, torque specs. I also found out today from toyota that the head bolts are not “torque to yield”, meaning they can be reused provided the threads on them are clean and free from dirt, grime, etc as posted above.
How to torque a 4AGE 16V head bolt?
Click to expand… Remember to always use NEW head bolts. 4AGE uses torque to yield head bolts that stretch during the torqueing process. This is from the BGB. 2) Mark the front of each cylinder head bolt with a paint mark. 4) Tighten each head bolt an additional 90 degrees in numerical order shown.
What are the torque specifications for a Toyota 1.6l-97ci-s4?
24.4 4A-FE Exhaust Manifold Bolts Type: Bolt 47 564 63.72 4A-FE Driveplate Bolts (AUTOMATIC Transmission) Type: Bolt 58 696 78.64 4A-FE Flywheel Bolts (MANUAL Transmission) Type: Bolt 14 168 18.98 Type: Bolt 3.5 42 4.75 Type: Bolt 7 84 9.49 Type: 16 192 21.69 Type: Bolt 7 84 9.49 4A-FE Rear Crankshaft Oil Seal Retainer Bolts Type: Bolt 87 1044
Can a Toyota 4AGE head bolt be reused?
I also found out today from toyota that the head bolts are not “torque to yield”, meaning they can be reused provided the threads on them are clean and free from dirt, grime, etc as posted above. Just adding the thread size for the head bolt/stud holes if anyone ever needs it.