What is the torque for Toyota Corolla lug nuts?
80 ft-lbs
Toyota Wheel Lug Nut Torque Specs Recommendations
| Model | Trim | Torque |
|---|---|---|
| COROLLA | ALL / ALL/4-100 | 80 ft-lbs |
| COROLLA IM | 17″BASE / 5-D00R | 80 ft-lbs |
| COROLLA | ALL | 80 ft-lbs |
| CRESSIDA | BASE / WAGON | 80 ft-lbs |
What is the torque spec for lug nuts?
New wheels should be re-torqued after the first 50 to 100 driving miles.
| Hardware Bolt or Stud Size | Typical Torque Range in Ft/Lbs | Minimum Number of Turns of Hardware Engagement |
|---|---|---|
| 14 x 1.25 mm | 85 – 90 | 9 |
| 7/16 in. | 70 – 80 | 9 |
| 1/2 in. | 75 – 85 | 8 |
| 9/16 in. | 135 – 145 | 8 |
What is the wheel torque specification on a 2009 Toyota Corolla?
Lug Nut Torque Settings Table For All Toyota Corolla Models since 1990 to present.
| Year / Make / Model | Trim | Lug Nut Torque (lbf·ft) |
|---|---|---|
| 2009 Toyota Corolla | XLE | 76 |
| 2009 Toyota Corolla | XLE 16″ option | 76 |
| 2009 Toyota Corolla | XRS | 76 |
| 2008 Toyota Corolla | CE (185/65R15 86 S 5×15) | 76 |
What size are Toyota Corolla lug nuts?
The Toyota Corolla wheel nut size is m12-1.5 thread size and 21 mm wrench size. Lug nuts are made of metal and are frequently designed and treated to prevent rust. However, over time they may develop rust as their protective coatings wear off or if they are neglected.
How much torque should a Toyota Corolla tire have?
The lug nuts on your toyota corolla should be torqued to 76 ft-lbs of torque.
What size are the lug nuts on a 2016 Toyota Corolla?
M12 x 1.50
Toyota Corolla 2016, Mag Seat Flanged Lug Nuts by Dorman®. Thread Size: M12 x 1.50.
What size lug nuts are on a 2006 Toyota Corolla?
Toyota Corolla 2006, Mag Seat Flanged Lug Nuts by Dorman®. Thread Size: M12 x 1.50.
What’s the correct lug nut torque?
proper lug nut torque by following these important steps: 1. Check torque before every trip 2. Use proper tools (Figures C and D) 3. Follow the appropriate star pattern sequence (Figure H) 4. Torque lug nuts in the correct stages and follow-up intervals after any wheel reinstallation (Figure L) For further information on these steps, you may want
What are the torque specifications for lug nuts?
Typical Lug Nut Torque Specifications. Lug Size Ft/Lbs Torque. 1/2″ 90-120 9/16″ 120-140 5/8″ 140-160. IMPORTANT NOTICE: As with all types of wheels retorque lug nuts after the first 25 miles & at 100 mile intervals until lug torque is maintained. How to Measure Bolt Patterns.
What are the lug nut torque specs?
The correct torque for installing lug nuts on your 5 X 8 trailer’s 5-lug wheels will depend on the size of the lugs. For a 1/2-inch lug the torque spec ranges from 75- to 85-ft-lbs. For a 9/16-inch lug the torque spec ranges from 135- to 145-ft-lbs.
What is the wheel lug nut torque?
Wheel Lug Torquing. (Lea en español) Proper wheel installation requires the wheel-attaching hardware (lug nuts or bolts) be tightened to the recommended torque specification for the vehicle make, model and year. Torque specifications are usually found in the vehicle’s owner’s manual.*. Proper torque requires using the correct tools, procedures and patterns.