Is it hard to change a front wheel bearing?
Changing your own wheel bearings is considered an intermediate job that can be done at home, but will need some speciality mechanic tools. The steps provided below are generalized to cover the three most common types of wheel bearings that are found on most vehicles.
Is it easy to replace wheel bearings?
Is it easy to replace a wheel bearing at home? Replacing a wheel bearing that comes as an assembly with the hub and bolts to the spindle or steering knuckle is not very difficult if you have proper skills, tools and the manual. Of course, the large axle nut is very tight and can be difficult to remove.
How to replace front wheel unit bearings in Toyota 4×4?
You have two options for doing the job: 1st is to buy pre-assembled unit bearings. These are new bearings, seal and 4 bolts with a new wheel hub spindle already pressed into the wheel bearings. This is a direct just swap out the unit bearing and cost about $100 more per side.
How do you remove the wheel hub spindle from a Toyota?
Using a shop press, press out the wheel hub spindle from the bearing. Make sure you use the appropriate size Toyota front wheel bearing tool (we are using a large socket) only pushing on the wheel hub spindle.
How do you remove unit bearing from truck?
Using a box end wrench unbolt the 4 bolts behind the wheel flange. These are the bolts that hold the unit bearing on the front spindle, the bolts will not come off the assembly at this point, but once backed completely off the unit bearing assembly can be removed and set aside. Unit Bearing Assembly off the truck.
How to tell if front wheel unit bearings are going bad?
ABS Sensor ring location: Running over-sized tires combined with hard use off road lead to the bearings to ware. You can check for ware by lifting the truck off the ground and pulling the top and bottom of the tire feeling and looking for play at the hub. The other sign of them going bad is the dreaded growl from one side when you turn.