How do you reset the timing belt light on a 1997 Toyota Hiace?
Turn off the ignition. Press and hold the trip meter button and turn on the ignition. Continue to hold the trip meter button for 5 seconds or more ensuring that the timing belt warning light is flashing. Release the trip meter button then within 5 seconds press it once.
How do you reset the Tbelt light on a Toyota Land Cruiser?
Turn the ignition to on position without starting the engine, hold the button for about five seconds. Press the tripmeter reset button and release, the display will show a number, see below picture.
Where is the timing reset light on my Prado?
i know its a bit late after the first post onthis thread but ive only just found this forum, but the timing reset light on my prado is onthe FRONT of the speedo,via a small hole in the bottom left hand side of the speedo face (tripometer is on the right) you have to poke a small screwdriver in hole and hold it in till light resets, hope this helps
When to reset the timing belt warning light?
As part of the service where the timing belt is changed, the Toyota service staff reset the warning light via computer. If you changed the timing belt earlier than when it’s due they can set a new odometer reading trigger for the timing belt that doesn’t match the service books. Adrian. Prado GXL 3.0L T Diesel Manual 2007 (update model).
How to reset the timing belt light on a kdj150 Prado?
Obviously for the US, the ODO is in miles, and I guess the T-Belt warning would be set in 10,000 mile intervals. 3. T-BELT WARNING RESET COMPLETION a) After setting the replacement setting value, hold the trip switch ON for more than 5 seconds then release the switch.
How to check timing belt on Toyota Prado?
check injection pump pulley at the 3 o’clock position. you will find another 2 marks (1 on pulley and 1 in housing/casing). don’t attempt to remove or adjust anything until all these marks are aligned. step 3; using a bottle of liquid paper, mark the timing marks and the exact location of the belt.