What does accelerated idle mean on a car?
But if the accelerated idle persists even after the engine is fully warmed up, it probably indicates a genuine problem. The first step is to determine if there are any diagnostic trouble codes stored in the PCM (powertrain control module). If there are, this will give you a good starting point for troubleshooting.
Why does my car idle at a higher RPM than normal?
Updated January 19, 2019. If your car seems to be revved up to a higher-than-normal RPM while idling, it’s not necessarily a problem. If this problem happens while the engine is cold, it may be part of the engine’s design.
What should I do if my car idling is too high?
Vincent Ciulla is a certified master automotive technician who has diagnosed and repaired light trucks, domestic and foreign cars, and diesel engines, for more than three decades. If your car seems to be revved up to a higher-than-normal RPM while idling, it’s not necessarily a problem.
Can a bad alternator cause a bad idle speed?
A vacuum leak in any of the hoses can be the culprit—inspect them all for leaks. A bad idle-speed control unit can cause the problem; it may need to be replaced. A faulty alternator can fast idle issues; if so, replace it. For the do-it-yourself mechanic, Many high-idle problems can be identified and remedied with some patient troubleshooting.
What should the idle speed be on a Honda Accord?
Over time, the idle speed may change in your Accord. This could be the result of repair work, outside temperature or the altitude at which the vehicle is driven. The normal idle speed for this vehicle is between 700 and 800 rpm (revolutions per minute).
Why does my car idle at 700 rpm?
There is an air filter which prevents debris from the air from getting into the chamber. But if this air filter is dirty or clogged, then there will be less clean air passing through it. This will cause the engine to idle rough. Your engine should normally get to around 700 RPM after you start the vehicle.
But if the accelerated idle persists even after the engine is fully warmed up, it probably indicates a genuine problem. The first step is to determine if there are any diagnostic trouble codes stored in the PCM (powertrain control module). If there are, this will give you a good starting point for troubleshooting.
What happens if the idle speed is too low?
If the idle speed is too low, the vehicle will run poorly and it will become more difficult to drive. If the idle speed is too high, it could eventually cause the vehicle to run hot, and it will also lead to the waste of fuel. Start the engine and let it warm up to normal operating temperature. Listen for the cooling fan to come on twice.