What does it mean to get error code 41?
Error code 41 states that a device driver is unable to locate the specific hardware device. This could mean your system has the wrong or outdated versions of drivers for the tool. As a solution, you might want to consider updating your hardware drivers.
Why does my Pajero have a code 41?
Thanks. That pretty much rules out it being a transmission related issue, making it an engine code 41. My primary suspicion at this point would be the solenoid pack that runs the vacuum harness. This pack includes the throttle solenoid which this code would be indicating there was a circuit malfunction on.
Is there a code 41 problem with a caravan?
NO PROBLEMS WHAT SO EVER….WE HAD ONE PROBLEM LAST TIME WE TOWED OUR CARAVAN WHEN THE MOTOR JUST STOPPED TWICE FOR NO REASON, THEN WE STARTED IT AGAIN, SO WE HAVENT TOWED AGAIN, JUST IN CASE REGARDS SANDRA they told us the problem is code 41 but they dont no what it means.. Thanks.
What causes trouble code 41 on SRS side air bag?
This bulletin provides a repair procedure for trouble codes 41 or 42 caused by surface oxidation on the contacts of the connectors of the SRS Side Air Bag System under the front seats. Codes 41 / 42 may also be caused by conditions other than oxidation, which must be eliminated prior to proceeding with this repair procedure.
What does code 41 mean on an ignition?
Ignition Control Error. The ECM monitors the ignition module performance. Code 41 can set when the ignition system performance does not meet factory specifications. Fault Code Description. 41 – Ignition control error.
Thanks. That pretty much rules out it being a transmission related issue, making it an engine code 41. My primary suspicion at this point would be the solenoid pack that runs the vacuum harness. This pack includes the throttle solenoid which this code would be indicating there was a circuit malfunction on.
Why do I have code 41 on my OBD?
The ECM monitors the ignition module performance. Code 41 can set when the ignition system performance does not meet factory specifications. If the ECM detects an internal fault with the MEM-CAL, code 41 will set. The MEM-CAL is a special “chip” that is installed in the ECM, based on the particular vehicle configuration.