Where are the spark plug wires on a Hyundai XG350?
Refer to the Hyundai car service manual for the factory recommended parts and parts numbers needed. Open the hood and locate the spark plug wires on the Hyundai XG350. The wires run across the top of the engine and are either blue or black (depending on the manufacturer of the last spark plug wires that were installed).
How do you remove a spark plug from a Hyundai?
Use the spark plug removal tool, ratchet, and a 3/8″ extension to remove the spark plugs from the engine. Rotate counterclockwise to remove the spark plug. You may need to use a magnetic pickup tool to pull out the spark plug. Install new spark plugs.
How do you install a new spark plug in a car?
Place the spark plug installation socket over the new spark plug. Insert into the top of the engine cylinder. Turn clockwise with the socket wrench until spark plug is tightened. Replace the ignition coil and bolt. Press the wiring harness back on. Replace the ignition cover.
How is the gap measured on a XG350?
This gap measurement is specific to the XG350, so the gap must be made to this specification for optimum spark. Insert the spark plug into the spark plug socket with the electrodes facing out and insert the plug into the engine.
How do you change the spark plug on a Hyundai?
Park, your Hyundai in a safe area, set the parking brakes, and allow the engine to cool down. Open Hood Next, open the hood. Clean the area near the spark plugs and around the ignition coils. Disconnect the negative battery terminal. Since you will be working with the electrical system, it is safe to disconnect the negative battery terminal.
How do you remove a coil from a spark plug?
Use a 10 mm socket to loosen the bolt that secures the coil in place. This vehicle uses a coil-on-plug design. Therefore you will have one coil on each spark plug. Once the bolt and connector have been removed, pull the ignition coils out.
Where are the spark plugs on a Santa Fe?
The rear spark plugs are blocked by the intake plenum. Step-by-step process on shifting the plenum out of the way to get to replace the spark plugs. This was done on a 2004 Hyundai Santa Fe 3.5L engine. Category Autos & Vehicles Show moreShow less Loading… Advertisement
How often should I change the spark plugs on my Hyundai Elantra?
How often should I change the spark plugs on my Hyundai Elantra? According to the owner’s manual of a 2016 Hyundai Elantra, the spark plugs should be replaced every 105,000 miles or 84 months. Keep in mind that depending on your driving style and conditions, the spark plugs may last longer or need to be replaced as early as 60,000 miles.