Can you change the spark plugs on a 2003 Taurus?
Changing the spark plugs on a 2003 Ford Taurus is a somewhat demanding job, especially when it comes to the rear spark plugs, and is better left to a person with some mechanical aptitude. The upper intake manifold and exhaust gas recirculation valve must be removed to gain access to the rear plugs.
How do you change a spark plug on a radiator?
Change one spark plug at a time and reinstall the spark plug wire. Start with the front spark plugs nearest the radiator. Pull the spark plug wire off the plug with a twisting motion. Remove the spark plugs with a 5/8-inch spark plug socket, a 3-inch extension and a ratchet. Gap the spark plugs to .045 of an inch with the gapping tool.
What’s the best way to Gap a spark plug?
Pull the spark plug wire off the plug with a twisting motion. Remove the spark plugs with a 5/8-inch spark plug socket, a 3-inch extension and a ratchet. Gap the spark plugs to .045 of an inch with the gapping tool. Install the spark plug, by hand, and tighten it with a spark plug socket and ratchet to 15 foot-pounds of torque.
How do you change the spark plugs on a Ford Taurus?
The trick is to remove portions of the plastic cowling. Start by removing the cabin filter cowl, just as you would if you were going to change the cabin filter. Then remove the three 5.5 mm (7/32″) screws and remove the lower cowl. You know have plenty of room to reach the rear spark plugs.
How do you change the spark plugs on a car?
Remove the spark plug wires and spark plugs in the same manner as the front ones, with one change: The rear plugs are difficult to grab with the fingers, so use the piece of vacuum hose on the tip of the plug to turn the plug out and to start the new plug in the head. Once started, the socket can be used to finish tightening the plug.
Pull the spark plug wire off the plug with a twisting motion. Remove the spark plugs with a 5/8-inch spark plug socket, a 3-inch extension and a ratchet. Gap the spark plugs to .045 of an inch with the gapping tool. Install the spark plug, by hand, and tighten it with a spark plug socket and ratchet to 15 foot-pounds of torque.