What does the code p1516 on the throttle mean?
What Does Code P1516 Mean? The Throttle Actuator Position Sensor (TAPS) provides the powertrain control module or PCM with the information needed on throttle movement. It can be located on the throttle body or on the accelerator pedal inside the vehicle.
What was the cause of the p1516 Chevy?
P1516 CHEVROLET Possible Causes Faulty Throttle Actuator Control (TAC) module Throttle Actuator Control (TAC) module harness is open or shorted Throttle Actuator Control (TAC) module circuit poor electrical connection
What to do if the p1516 code returns?
If the P1516 code does return, further testing will be required. We will need to test the Throttle Actuator Position Sensor (TAPS). The easiest way of doing this is to monitor the voltage signals from the Throttle Actuator Position Sensor (TAPS) as you drive the vehicle down the road as it is acting up.
What is the manufacturer’s specific code for p1516?
Code P1516 is a manufacturer’s specific code, mostly utilized by General Motors products, namely Buick, Chevrolet, GMC, Hummer and Saturn. This lets you know that diagnosing this condition may be different between manufacturer’s vehicles.
What Does Code P1516 Mean? The Throttle Actuator Position Sensor (TAPS) provides the powertrain control module or PCM with the information needed on throttle movement. It can be located on the throttle body or on the accelerator pedal inside the vehicle.
What does code p1516 mean on a Jaguar?
Idle Air Control Solenoid Valve Signal 4 Circuit Low Input (Subaru). Park/Neutral Position Switch Gear Change Neutral/Drive (Jaguar). What Does Code P1516 Mean? The Throttle Actuator Position Sensor (TAPS) provides the powertrain control module or PCM with the information needed on throttle movement.
If the P1516 code does return, further testing will be required. We will need to test the Throttle Actuator Position Sensor (TAPS). The easiest way of doing this is to monitor the voltage signals from the Throttle Actuator Position Sensor (TAPS) as you drive the vehicle down the road as it is acting up.
What does p1516 mean on a GMC Hummer?
If at .5 volts, the engine is said to be at idle speed. The voltage will vary based upon driver input. Code P1516 is a manufacturer’s specific code, mostly utilized by General Motors products, namely Buick, Chevrolet, GMC, Hummer and Saturn. This lets you know that diagnosing this condition may be different between manufacturer’s vehicles.
Why does my Chevy Silverado have a TAC code p1516?
A vehicle may be brought into the dealer for a reduced power message, and DTCs P0120, P0220, P1516, P2101, or P2135. The Throttle Actuator Control (TAC) / throttle body type trouble codes, may be caused by a loose wiring crimp at the throttle body connector, or a broken throttle body circuit.
What does the code p1516 mean on a Chevy Silverado?
The code stands for “Throttle Actuator Control Module Throttle Actuator Position Performance,” which can seem like gibberish, but is referring to a discrepancy found in-between the signals that the APP sensor is sending to the TAC module and TPS sensor.
What is the error code for throttle actuator control module?
Error Code P1516 is defined as Throttle Actuator Control Module Throttle Actuator Position Performance.
What to do if your throttle body fails?
Fix binding or bent throttle-failed body, repair or replace as needed Make sure you check the ground wire from the TAC harness to the back of the engine block passenger side. In many cases, this could be the culprit of the code. Also in some cases, the throttle body plate could be sticking because of dirt.
What causes no throttle response on Check Engine light?
As with other error codes, this code activates the Check Engine light and registers the code to the vehicle’s memory system. Also, since this code affects the throttle actuator position performance, the vehicle will show no throttle response. Multiple factors could cause this code, such as: Poor electrical connection in TAC module circuit