How to reset your Saturn Vue after an oil change?
Below is the procedure for the Saturn VUE 2008 2009 . Follow the steps below to reset the oil life monitor after each oil change. Turn the ignition to the “RUN” position. Immediately press and release the accelerator pedal 3 times within 5 seconds. If “CHANGE ENGINE OIL” light is flashing, the system is reset.
How to reset the oil life monitor after an oil change?
Follow the steps below to reset the oil life monitor after each oil change. Turn the ignition to the “RUN” position. Immediately press and release the accelerator pedal 3 times within 5 seconds. If “CHANGE ENGINE OIL” light is flashing, the system is reset. Turn the ignition off.
What should I do if my oil change light is flashing?
Turn the ignition to the “RUN” position. Immediately press and release the accelerator pedal 3 times within 5 seconds. If “CHANGE ENGINE OIL” light is flashing, the system is reset. Turn the ignition off. The 3.5 liter engine holds approximately 4 quarts (3.8 liters) of 5W-30 oil when the engine oil and filter are changed.
How to reset maintenance light on Cadillac CTS?
Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key. Change Oil lamp will flash for 2-10 seconds while it resets. Once it stops flashing, the maintenance light reset is complete. Turn key to OFF position and then start engine to verify indicator is no longer illuminated.
Below is the procedure for the Saturn VUE 2008 2009 . Follow the steps below to reset the oil life monitor after each oil change. Turn the ignition to the “RUN” position. Immediately press and release the accelerator pedal 3 times within 5 seconds. If “CHANGE ENGINE OIL” light is flashing, the system is reset.
Follow the steps below to reset the oil life monitor after each oil change. Turn the ignition to the “RUN” position. Immediately press and release the accelerator pedal 3 times within 5 seconds. If “CHANGE ENGINE OIL” light is flashing, the system is reset. Turn the ignition off.
Turn the ignition to the “RUN” position. Immediately press and release the accelerator pedal 3 times within 5 seconds. If “CHANGE ENGINE OIL” light is flashing, the system is reset. Turn the ignition off. The 3.5 liter engine holds approximately 4 quarts (3.8 liters) of 5W-30 oil when the engine oil and filter are changed.
Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key. Change Oil lamp will flash for 2-10 seconds while it resets. Once it stops flashing, the maintenance light reset is complete. Turn key to OFF position and then start engine to verify indicator is no longer illuminated.