When to replace the solenoid on a Saab 9-3?
WARNING PLEASE READ!!! IF YOU ARE NOT COMPLETELY SURE OR DO NOT HAVE THE PROPER SCAN TOOLS. WE SUGGEST PRIOR TO ATTEMPTING TO TACKLE THIS PROCEDURE TO HAVE A PROFESSIONAL DO THE REPLACEMENT. When the ignition is switched on the limp-home solenoid will be activated.
How to remove the throttle body from a Saab 9-3?
Remove the rubber bend from the throttle body and turbocharger delivery pipe. Remove the 3 throttle body retaining bolts. Remove the 3 throttle body retaining bolts. Turn the ignition switch to ONContact the Trionic and clear diagnostic trouble codes. Turn the ignition switch to OFF and wait 10 seconds.
When did the Saab 9 3 come out?
The Saab 9-3 was launched in 1997 for the 1998 model year. It is manufactured with various petrol engines and 2.2L turbodiesel engine. It is offered with 5-speed manual and 4-speed automatic gearbox.
How to replace brake pads on a 2007 Saab 9-3?
And if you are doing a 2007 9-3 and are replacing the rotors, expect to remove the caliper holders using an E20 torx socket (not found in your corner shop) in order to free the rotors. Expect to not be able to budge at least one of the 4 bolts (2 each side) laying on the ground no matter how long your breaker bar is.
What kind of platform does the Saab 9-3 have?
The 9-3 was first based on the GM2900 platform and subsequently changed to the GM Epsilon platform. Other vehicles using this platform included the Opel Vectra and Cadillac BLS. Saab’s last owners, National Electric Vehicle Sweden (NEVS) were assembling the 9-3 sedan (saloon) as Saab’s only model.
Remove the rubber bend from the throttle body and turbocharger delivery pipe. Remove the 3 throttle body retaining bolts. Remove the 3 throttle body retaining bolts. Turn the ignition switch to ONContact the Trionic and clear diagnostic trouble codes. Turn the ignition switch to OFF and wait 10 seconds.
WARNING PLEASE READ!!! IF YOU ARE NOT COMPLETELY SURE OR DO NOT HAVE THE PROPER SCAN TOOLS. WE SUGGEST PRIOR TO ATTEMPTING TO TACKLE THIS PROCEDURE TO HAVE A PROFESSIONAL DO THE REPLACEMENT. When the ignition is switched on the limp-home solenoid will be activated.
When to replace the water pump on a Saab 9-3?
As such, sometimes it seems “too soon” with every major service interval (I’m thinking every 60k miles on a 2004 Saab 9-3) so subsequent options would be to include the job whenever the coolant gets flushed or when the water pump or coolant hoses get replaced.