Why are my wipers not working on my Saab 9-3?
If you have a customer concern with the wipers not parking, the intermittent wipers inop and washers not working, this can be caused by a faulty park switch in the wiper motor. Replace the wiper motor assembly.
Why are the wiper blades on my car not working?
Your wiper blades are torn. The condition of your wiper blades is directly related to how well your windshield wipers work. If the rubber edges on your wiper blades are torn, the wiper will not make proper contact with the windshield to clear moisture or debris away.
When do I Know my wiper relay is bad?
One of the quickest indicators that a problem exists with the intermittent wiper relay is when the wipers are not intermittent and only work at one speed. The relay switch sends an electrical signal to the module that controls the operation of the wiper motor and gears inside.
What to do when your Saab remotes stop working?
In the spring, when the normal wheels, with transmitters, are re-installed, the system will operate normally and no further programming will be necessary. If a customer reports that both of their remotes suddenly stopped working, first try removing fuse 2 for the CIM from the fuse panel on the end of the dash and re-install it.
Why are the wipers not working on my Saab 9-3?
The CIM also controls the steering lock and the ignition switch. The CIM on our 9-3 Vector went wrong and the wipers would swipe if you brushed a finger on the switch, almost as if it just needed static electricity to work it! very odd fault. A new CIM fixed it, but the CIM is not cheap. I think ours cost somewhere around £300.
Why do my car wipers keep working when I turn them off?
When you turn the wiper switch “off,” it activates a mechanism in the motor called the park switch, stopping the flow of power to the linkage assembly and wiper arms once the wipers return to the bottom position. If your wipers keep working even after you’ve switched them off, it’s probably one of the following three problems.
One of the quickest indicators that a problem exists with the intermittent wiper relay is when the wipers are not intermittent and only work at one speed. The relay switch sends an electrical signal to the module that controls the operation of the wiper motor and gears inside.
When do you know your windshield wiper motor is bad?
3. Windshield wiper motor doesn’t move but you hear it working. The most common sign that a problem exists with the wiper module is when you activate the switch but don’t see the wiper blades moving.