How to remove ignition switch cylinder on Saab 9-5?
This is for a 2004 Saab 9-5 and I assume it is the same for all first generation Saab 9-5 model years. Remove the transponder by turning it clockwise and lift up. The plastic cover on mine is pretty loose so I took that off first so I could see what is underneath.
What happens when the cylinder is removed from a Saab?
When the whole cylinder is removed from the housing you will be presented with the lock mechanism made up from spring loaded brass plates going into the cylinder. These plates go flush with the cylinder surface when the key is inserted, allowing the cylinder to turn.
Where is the CIM located on a Saab 9-3?
The CIM (Column Integration Module) is located inside the steering wheel. It is the security centre and controls the central locking, ignition, immobilisation, steering lock etc. Both of these could be the culprit.
How do you remove a cylinder from an ignition switch?
To clear the cylinder of the mechanism carefully remove the key while holding on top of the brass plates to prevent them from falling out. When easing the grip the brass plates will go into locked position, protracting from the cylinder.
How to replace ignition switch in Saab 9-3?
Use a screwdriver to compress each clip in turn, whilst pushing the switch out of its socket. The switch is connected to a cable via a connector. Locate the torque lever and twist this to release the connector. You now have the ISM in your hand. Swap this with a replacement unit. Mine cost £126,00 new from eBay.
When the whole cylinder is removed from the housing you will be presented with the lock mechanism made up from spring loaded brass plates going into the cylinder. These plates go flush with the cylinder surface when the key is inserted, allowing the cylinder to turn.
The CIM (Column Integration Module) is located inside the steering wheel. It is the security centre and controls the central locking, ignition, immobilisation, steering lock etc. Both of these could be the culprit.
To clear the cylinder of the mechanism carefully remove the key while holding on top of the brass plates to prevent them from falling out. When easing the grip the brass plates will go into locked position, protracting from the cylinder.
What should I do if I Lost my Saab key?
A situation where you have lost all of your keys will inevitably be more expensive than if you have a working key, and what you need is a second key; this is what we call a spare. Providing you with a key and getting it programmed to start your SAAB if more difficult if you have no keys at all.
This is for a 2004 Saab 9-5 and I assume it is the same for all first generation Saab 9-5 model years. Remove the transponder by turning it clockwise and lift up. The plastic cover on mine is pretty loose so I took that off first so I could see what is underneath.
Where can I find the key to my Saab?
On this page you’ll find an easy way to find the correct key, remote/transmitter, or other key parts for your Saab! NOTE: All orders for VIN-specific cut keys require entering your VIN in the box during checkout and can only ship via 1-Day or 2-Day FedEx Air.
Where is the ignition key lock cylinder located?
Your vehicle’s ignition key lock cylinder is mounted either in the steering column, on the dash, or the center console. Most ignition lock cylinders have four positions: “off,” “accessory,” “start,” and “on.”. When you turn and hold the key at the “start” position,…
What kind of transmission does a Saab 9-3 have?
In modern Saab cars, Saab 9-3 and Saab 9-5 models, you will most often come across AF40-6 automatic transmissions (aka AWTF-80 SC produced by Aisin Warner ). The AF40-6 automatic transmission is an electronic 6-speed automatic gearbox with lock-up.
What happens when you remove the ignition key?
The ignition barrel is supposed to pop up slightly when you remove the key from the ignition switch. It is common this mechanism gets dirty after a while so it doesn’t pop up after you remove the key and the car thinks it is still in the OFF position.
Why is the key not turning on my Saab 9-3?
Saab 9-3 Key Won’t Turn Repair Symptoms. When the ignition switch lock cylinder fails, it can create a situation where the ignition cannot be turned, or takes much wiggling and shaking before it finally turns.
Why is my steering lock not working on my Saab?
Tried different key (to another saab), displayed “key not recognised” etc so assume both ISM’s are functioning. Moved/bodged ISM past ‘Lock’ position, get “Steering Malfunction, stop safely etc”, still can’t turn it over.
Why does my Saab 9-3 engine not start?
It really can get that one last start out of it. There are a lot of issues that can cause your 9-3 to crank, but not start. The engine needs air, fuel, and a spark in order to run. It is highly likely that if the engine is cranking, but not starting that it has thrown an OBDII code.
What kind of car is a Saab 9-5?
To avoid this, cancel and sign in to YouTube on your computer. I Bought the Cheapest Saab 9-5 in the US! (Non-Running) A car channel created by car guys for car guys! My current cars include a 2008 Saab 9-3 Turbo X (Maptun Stage 2), 2003 Saab 9-3 (Stage 3) and 1995 Mazda Miata.
Why is YouTube not working on my Saab 9-5?
If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. I Bought the Cheapest Saab 9-5 in the US!
If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. I Bought the Cheapest Saab 9-5 in the US!
To avoid this, cancel and sign in to YouTube on your computer. I Bought the Cheapest Saab 9-5 in the US! (Non-Running) A car channel created by car guys for car guys! My current cars include a 2008 Saab 9-3 Turbo X (Maptun Stage 2), 2003 Saab 9-3 (Stage 3) and 1995 Mazda Miata.
How to join Saab Club of Dubai Facebook group?
G’day mate.. If you want to contact me: [email protected] Want to Join SAAB club of DUBAI .. https://www.facebook.com/groups/434322280593864/ An error occurred while retrieving sharing information.
When did Haynes replace ISM on Saab 9-3?
So, equipped with a Haynes “Saab 9-3 Sept 2007 to 2011 Owners Workshop Manual”, a set of star shaped screwdrivers, and a camera to record all the steps, as well as a pile of clear plastic bags to put the screws in and label them (they are all subtly different in size, thread and length), I set about to replace the ISM with a unit I bought on eBay.
When did the first Saab 9-5 come out?
In this article, we consider the first-generation Saab 9-5 (YS3E), produced from 1997 to 2009.
Where are the fuse panels on a Saab 9-5?
Here you will find fuse box diagrams of Saab 9-5 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 and 2009, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.
Why does my 2001 Saab 9.5 stop running?
My 2001 Saab 9.5 will simply just stop running sometimes while driving on freeway at freeway speeds. I have had the dic replaced the ignition censor all the spark plugs and it worked fine for about 2 weeks but now it’s doing the same thing and it seems,that the battery is draining power fast.
How much does a no start Saab cost?
The average cost for a Saab 9-5 No Start Diagnosis is between $143 -$180. Learn More car just dies while driving…without any warning!!! haven’t had it diagnosised yet.
How many ignition cassette failures does a Saab have?
Three ignition cassette failures: 1) sudden failure without warning @ highway speeds (54K); 2) intermittent misfires and elective replacement (200K); 3) sudden failure @highway speeds with a single misfire 1 minute prior (241K) Rough idle,dies while driving,sometimes won’t start, engine light stays on and or flashes.
What to do if your Saab trunk is not opening?
You can fix the wire by soldering them back together. Then after that you will want to shrink wrap those so they will be resistant to any “elements” that may come in contact with the wires. I did not find this out by myself, I found it on a Saab forum, SaabCentral. Loading…
Can a fob be programmed to any car?
Didn’t have wis or opcom at the time last year any key can be programmed to any car…. Click to expand… Really?! Always thought that fob has to be new or “virginised” by resoldering a chip to it to enable programming of it to a new car.
The ignition barrel is supposed to pop up slightly when you remove the key from the ignition switch. It is common this mechanism gets dirty after a while so it doesn’t pop up after you remove the key and the car thinks it is still in the OFF position.
How long does it take to turn off a GM security light?
Leave the key in the “ON” position for approximately 11 minutes. The security light will be steady on or flashing for the 11-minute period. Do not proceed to Step 2 until the security light turns off or stops flashing. 2. Turn the ignition switch to the “OFF” position for 30 seconds. 3.
What does it mean when your car key won’t turn?
If the car’s battery is dead, you will often notice that the key won’t turn. This isn’t unusual in higher end vehicles, which frequently use more complex electronic ignition systems. Check the life of your battery to verify this. Oftentimes, the problem is not with the related components of the car, but with the vehicle key itself.