How do you winterize a Yamaha boat?

Prior to winterizing the engine, it’s a good idea to give the boat a good cleaning inside and out, power wash the bottom, and put a coat of wax on fiberglass hulls….Here are the steps:

Change oil & filter.
Fog the engine.
Grease fittings.
Change fuel filter.
Add fuel stabilizer.
Wash & dry.

Can I winterize my boat myself?

For the handy, self-sufficient boat owner, taking care of winterizing yourself is a great way to save money. Ironically, DIY can potentially even save you some time. Winterizing a boat can be done in less than an hour in many cases, less time than you’d spend just driving the vessel to and from the marina or shop.

How do you winterize a boat step by step?

How To Winterize Your Boat

Step 1: Replace engine oil.
Step 2: Flush and drain cooling water.
Step 3: Stabilize fuel.
Step 4: Protect internal engine components.
Step 5: Replace gear oil.
Step 6: Grease and lubricate.
Step 7: Remove valuables.
Step 8: Clean and wax.

Do Yamaha boats have to be winterized?

Winterization of Yamaha Jetboats. If you live in an area where you can’t use your boat year-round, you may need to winterize it. If you have a lay-up period of perhaps 3 months or less, you probably don’t need to worry about fuel treatment or fogging oil.

Does a 4 stroke outboard need to be winterized?

Like inboards and sterndrives, outboard engines are also subject to potential damage from freezing and from being laid up in disuse for months at a time. So outboards demand winterizing too.

Do you leave antifreeze in boat engine?

You do NOT want to leave puddles or buckets of engine coolant lying in the open, and it must be handled carefully and disposed of properly. Boat antifreeze is a tasteless and non-toxic blend of propylene glycol and water used for preventing freezing in boat systems.

Can you run a Yamaha jet boat out of water?

Running Yamaha, Kawasaki, And Others Out Of The Water They still can be run out of the water for a few seconds also but the entire engine and exhaust are not being cooled. The way these jet skis get water is not like a boat where it has a spinning pump that needs to be in the water.

How do you winterize a Yamaha jet boat?

1: Add Fuel Stabilizer into system and circulate through engine by running for approx 5 minutes. 2: Top off fuel tank with fuel to prevent moisture condensation in fuel tank. 3. Fog your engines with Yama-Lube Stor Rite Engine Fogging Oil. 4. Blow out any excess water remaining in engine or exhaust system. We hope this video was helpful to you.

Is it possible to winterize a Yamaha 4 stroke?

Today, we are focusing on the right way to winterize your Yamaha Outboards, specifically the 4-stroke. It’s not nearly as hard as you’d think, and, if done properly, it ensures that your motor will be ready for the next boating season with minimal work.

Is there a way to winterize an outboard motor?

You may also be wondering the steps to winterize your outboard motor. Our experts at boats.com are here to help with our all-encompassing winterization guide.

What’s the best way to winterize a car?

Winterizing Your Engine Flush the engine with fresh water. Stabilize your fuel. Fog the engine cylinders and carburetor intakes. Flush your engine block with antifreeze. Change the oil. Drain and replace the gear case lubricant. Disengage the battery and store it in a safe, dry place for the winter.

Do you need to winterize your outboard motor?

Winterizing your outboard motor is one of the most important maintenance you can perform as a boat owner. It ensures safe boating in the spring, and also helps to keep your outboard (s) performing well.

How much does it cost to winterize a boat?

Cost if you do: $5 to $10. Cost if you don’t: $250 to $1,200. Aerosol fogging solutions coat the inside of the engine to protect it until spring. Each engine manufacturer makes proprietary products they promote as ideal for their engines.

Navigation