Where are the coil packs on a Porsche Cayenne?
In practice though, the plugs in the Cayenne last a very long time. The coil packs are usually more of a problem. If you notice a slight roughness when the car accelerates sometimes along with a check engine light, you may want to investigate further. On the Cayenne V8 models, there are eight coil packs that sit on top of each spark plug.
Is there a problem with my Porsche Cayenne?
Cayenne owners in large numbers are being affected by a defect of Porsche Cayenne that causes vibrations that have been classified as “characteristic” by PCNA. For months PCNA has attempted to resolve this issue through tire and wheel rebalancing, as well as tire replacement.
What should spark plug look like on Porsche Cayenne?
The color of the plug is a good indicator of how the engine is running. Ideally, you want to see a slightly tan looking plug. This typically means that the engine is running well. Install your new plugs using a torque wrench to measure the amount of torque applied to the plug.
Why does my Cayenne have a rough idle?
Porsche Cayenne S Rough Idle Stumble can be caused by a number of things, today we talk about ignition misfire diagnosis. Modern engine electronic control units are more complex than ever.
In practice though, the plugs in the Cayenne last a very long time. The coil packs are usually more of a problem. If you notice a slight roughness when the car accelerates sometimes along with a check engine light, you may want to investigate further. On the Cayenne V8 models, there are eight coil packs that sit on top of each spark plug.
The color of the plug is a good indicator of how the engine is running. Ideally, you want to see a slightly tan looking plug. This typically means that the engine is running well. Install your new plugs using a torque wrench to measure the amount of torque applied to the plug.
What’s the misfire code on a Porsche Cayenne?
P0308 Cylinder no. 8 misfire. As you can see, the misfire code corresponds with each cylinder on the car so you can isolate the faulty coil pack. (Note: In this article, the right/left orientation is from looking at the engine from the front of the car).
How to remove torque strut from Porsche Cayenne?
To remove the torque strut, you’ll need a 12mm triple square socket and a regular 16mm socket. At the engine end of the torque strut, place the triple square socket in the front of the bolt while counter holding the 16mm nut at the rear.
How do you jump start a Porsche Cayenne?
Attach the positive “+” side of the jumper cables to the terminal. Now attach the other side to the positive terminal on the car with the good battery. Attach the negative side of the jumper cables to the negative “-” post on the car with the good battery. Attach the other end to the negative terminal on the Cayenne.
Why is the Porsche Cayenne called the Boxter?
When Porsche decides to build something new, they do it with great responsibility and make sure, their new creation deserves to wear this name proudly. It happened with 911, Boxter, and the Cayenne is no exception.
When to hook up power supply to Porsche Cayenne?
Keep in mind that Porsche recommends hooking up a vehicle power supply (and NOT a battery charger) to the car if you will be working on the vehicle for more than 15 minutes for procedures such as: using a diagnostic scanner, adjusting the headlights and any time the doors, hood and rear hatch will be open for an extended period of time.
Attach the positive “+” side of the jumper cables to the terminal. Now attach the other side to the positive terminal on the car with the good battery. Attach the negative side of the jumper cables to the negative “-” post on the car with the good battery. Attach the other end to the negative terminal on the Cayenne.
Keep in mind that Porsche recommends hooking up a vehicle power supply (and NOT a battery charger) to the car if you will be working on the vehicle for more than 15 minutes for procedures such as: using a diagnostic scanner, adjusting the headlights and any time the doors, hood and rear hatch will be open for an extended period of time.
What causes a Porsche Cayenne to start slow?
The electrical system on the Porsche Cayenne is rather complex and can cause a variety of problems when a battery has a low charge. On the Porsche Cayenne, a flat battery can cause a multitude of electrical glitches, Check Engine Lights (CELs) and slow starter operation.
How can I check the battery in my Porsche Cayenne?
Simply take a screwdriver and push the latch to the closed position. This will trick the car’s computer systems into thinking that the door is closed and it will shut off the lights. Due to the design of the car, the best way to check battery condition is to use the factory Porsche diagnostic computer or a good aftermarket software package.