What does the oil temperature sensor on a Porsche do?
This sensor measures the temperature of the coolant and is used to adjust mixture levels as the engine begins to heat up to optimum operating temperature. The oil level sensor/oil temperature sensor is shown by the blue arrow.
Where is the coolant temperature sensor on a Porsche Carrera?
This sensor is simply held in place by a rubber grommet that is attached to the intake manifold on the left side of the engine near the air-oil separator. Figure 2. The coolant temperature sensor is located on the pulley side of the engine off to the right side of the car near the cylinder head.
Where is the oil pressure sensor on a Porsche 911 Carrera?
For 2002 and later three-chain motors, the sensor is located on the top of the right cylinder head toward the front and on the left cylinder head toward the rear (insert photo, blue arrow). This photo shows the oil pressure sender/switch.
What are the gauges on a Porsche 996?
The 996 cluster has two additional gauges, a voltmeter and an oil pressure gauge that you can hook up and make operational. In addition, the later-style 996 gauges have an improved dot-matrix style screen that is an upgrade from the original style.
What should oil pressure be on Porsche 996?
If the oil pressure gauge pegs to the top of the gauge, the connection is broken and you have a problem with the signal wire: time to troubleshoot it with a multimeter. If you start the car, the oil pressure gauge should go up to 4 or 5. If the gauge doesn’t operate properly, you might try removing and reseating the connectors.
How to upgrade the Porsche Boxster 996 gauge cluster?
One of the neat upgrades that you can perform on your Boxster is to install the Porsche 911 (996) gauge cluster into your dashboard. The 996 cluster has two additional gauges, a voltmeter and an oil pressure gauge that you can hook up and make operational.
This sensor measures the temperature of the coolant and is used to adjust mixture levels as the engine begins to heat up to optimum operating temperature. The oil level sensor/oil temperature sensor is shown by the blue arrow.