Where does the Porsche Boxster Head Unit plug in?
If your car does not have an external amplifier, then the speakers for the Boxster will plug directly into the brown connector B on the back of the radio. If your Boxster has an external amplifier, then there will be a smaller yellow connector that outputs the signals from the head unit to the amplifier.
What kind of head unit do I need for Boxster 987?
About 3 or 4 years ago I fitted a fabulous Pioneer 2-DIN unit to my previous 987 Boxster and it transformed the audio and SatNav. It allowed me to stuff all my music on to the hard disk in the head unit and faultlessly integrated my phone by bluetooth.
How to remove the radio from a Porsche Boxster?
Using the set of factory radio removal tools (available from Becker, part number BNA-1184-989), pull out the radio as detailed in Photo 4 of Pelican Technical Article: Installing the Rear Speaker Kit. On the back of the unit, there may be a few wire connectors, and a smaller antenna connector.
Can a Porsche Boxster be replaced in 2005?
This article specifically contains only wiring information for the 1997-04 Boxsters, but is also applicable to the 2005 and later cars. The good news is that the replacement process is relatively easy, providing you have the right information, and the right parts.
If your car does not have an external amplifier, then the speakers for the Boxster will plug directly into the brown connector B on the back of the radio. If your Boxster has an external amplifier, then there will be a smaller yellow connector that outputs the signals from the head unit to the amplifier.
What kind of stereo system does a Porsche Boxster have?
In brief: This Crutchfield Research Garage article gives you an overview of your Boxster’s stock stereo system and your aftermarket upgrade options. Use our vehicle selector to find the gear that will fit your Porsche.
This article specifically contains only wiring information for the 1997-04 Boxsters, but is also applicable to the 2005 and later cars. The good news is that the replacement process is relatively easy, providing you have the right information, and the right parts.
How do you replace the dash speaker in a Porsche Boxster?
The center dash speaker is very easy to deal with. Use a panel tool to gently pry up the rear edge of the dash grille and release two retaining clips, then pry up the front edge to release one more clip. Set the grille aside, loosen the two Torx T-20 screws securing the speaker to dash, then disconnect the harness and remove the speaker.