Can you put sport seats in a Porsche Boxster?
Having the right seats really make a huge difference in any car. The good news is that the seats that are used on the venerable Porsche GT3 or even sport seats from a regular 996 can be easily fitted into the Boxster.
Do you need to disable AWS on Porsche Boxster?
If you use a five-point harness with your seats, then you will need to disable the seat belt sensors. Finally, you need to turn off the Automatic Weight Sensor (AWS) for the passenger seat.
Which is better Porsche Boxster sport or GT3?
The GT3 seats also tend to sit lower in the car than stock seats or aftermarket race seats, which is great if you’re tall and your helmet tends to stick up too much in the car. The GT3 seats should be a direct swap into the 1997-04 Boxsters with no airbag computer programming required.
Can a GT3 seat be installed in a Boxster?
The GT3 seats should be a direct swap into the 1997-04 Boxsters with no airbag computer programming required. If you install an aftermarket seat in your car, you will initially have a problem with the airbag computer giving you errors. You need to reprogram the computer (using the Porsche factory PST-2 or PIWIS) to ignore the error signals.
How to remove the door handle on a Porsche Boxster?
The blue arrow points to the connection where the handle itself connects to the door lock mechanism. Disconnect this in order to remove the door lock mechanism (see also inset of Figure 5 ). The purple arrow points to the electrical switch which tells the car to lower the window in preparation for opening the car door.
Is there a power lock on a Porsche Boxster?
The integrated lock assembly also contains all of the motors for the power locks, which also tend to fail over time. With the door panel removed, you can easily access the door lock mechanism.
Having the right seats really make a huge difference in any car. The good news is that the seats that are used on the venerable Porsche GT3 or even sport seats from a regular 996 can be easily fitted into the Boxster.
The GT3 seats should be a direct swap into the 1997-04 Boxsters with no airbag computer programming required. If you install an aftermarket seat in your car, you will initially have a problem with the airbag computer giving you errors. You need to reprogram the computer (using the Porsche factory PST-2 or PIWIS) to ignore the error signals.
If you use a five-point harness with your seats, then you will need to disable the seat belt sensors. Finally, you need to turn off the Automatic Weight Sensor (AWS) for the passenger seat.
Do you need to disable the seat belts on a Porsche?
You need to reprogram the computer (using the Porsche factory PST-2 or PIWIS) to ignore the error signals. The late model cars with side airbags in the seat also need to be disabled. If you use a five-point harness with your seats, then you will need to disable the seat belt sensors.
How to remove the front bumper on a Porsche Boxster?
The next step in removing the front bumper cover is to remove the screws that attach it to the top of the chassis (see Photo 1 and Figure 2 ). To remove the trim panel and expose the actual screws holding the top of the bumper to the chassis, turn the plastic screws ( Figure 1) 1/2 turn and remove them.
The GT3 seats also tend to sit lower in the car than stock seats or aftermarket race seats, which is great if you’re tall and your helmet tends to stick up too much in the car. The GT3 seats should be a direct swap into the 1997-04 Boxsters with no airbag computer programming required.
What should I do with my Porsche 996?
Also PC tips and tricks for upgrading and repairing your computers. URO RS Engine Motor Mounts Review Porsche 911 964/993/996/997-Aftermarket Bargain or Waste of Money? An error occurred while retrieving sharing information.