How to remove the SEAT driver of Porsche Cayenne 2004?
To remove battery if that is what you are doing you only have to remove the 2 m10 screws at the front of the seat the lower ones in the floor and the seat tips back You can’t post conmments that contain an email address.
How to replace rear shocks on a Porsche Cayenne?
Replace them with help from Pelican! Replacement of your rear shocks and springs is one of the most common procedures for your Cayenne. Use this tech article for complete details on the replacement process. In addition to the control arm, there are also three link arms that help articulate the rear suspension.
What should I know about my Porsche Cayenne?
Understanding The Engine Management System in your Cayenne can help with repairs and diagnosing issues. Don’t get stranded by a bad serpentine belt, change yours now! The tensioner keeps the serpentine belt tight around the pulleys. Here’s how to replace it. A basic tune-up procedure for just about any car on the road.
What happens when a Porsche Cayenne starter fails?
Follow our easy replacement steps. A failing starter will take longer and longer to crank, despite having a full battery. Don’t ignore a failing starter; replace it with help from Pelican. Worn rubber bushings in the torque strut can cause vibration when driving.
Where is the AWS sensor on a Porsche?
The AWS occupancy sensor is located under the passenger front seat. It detects if a person is seated in the passenger seat and if the person is a child or an adult. The passenger sensor itself can fail, which then triggers the airbag warning light on your Porsche dashboard.
How do you replace power seat switch on Porsche Cayenne?
Maneuver the trim panel so you can access the rear of the switch. Remove the two electrical connectors from the switch assembly by squeezing the plastic tabs inwards (green arrows) and then pulling the connectors out of the switch. Keep in mind that the electrical connections may be different if you have a memory function built into the switch.
Where are crash codes stored on a Porsche?
One is that crash codes are stored in the airbag module. Crash data can not be cleared even with a Porsche scanner. They will need to be reset by a specialist that performs Porsche airbag module reset, on eBay or the other option is to replace the airbag module, which is a very expensive repair.