How can I tell if my cooling fan relay is bad?
There are several ways to tell if a bad cooling fan relay is to blame for an overheated engine. The easiest method is to start the engine and then turn on the air conditioning. If the fan doesn’t engage, there may be something wrong with the cooling fan relay.
What happens when a radiator relay goes bad?
A faulty or broken relay cannot deliver power to the cooling fans. In turn, the unpowered fans won’t run, leaving the radiator to its own devices. Deprived of the helpful influx of air from the cooling fans, the radiator cannot remove as much heat as it usually does.
Can a radiator fan and condenser fan share a relay?
There are, however, some models that use a dedicated second unit to the condenser. In such a scenario, the condenser fan and radiator fan may or may not share the same relay. If the cooling fan does not engage, you can check whether the relay is to blame by swapping it out for a different relay.
What is the function of the cooling fan relay?
The cooling fan relay essentially functions as the switch for the engine’s cooling fans, and is therefore an important electrical component of the vehicle’s cooling system.
There are several ways to tell if a bad cooling fan relay is to blame for an overheated engine. The easiest method is to start the engine and then turn on the air conditioning. If the fan doesn’t engage, there may be something wrong with the cooling fan relay.
A faulty or broken relay cannot deliver power to the cooling fans. In turn, the unpowered fans won’t run, leaving the radiator to its own devices. Deprived of the helpful influx of air from the cooling fans, the radiator cannot remove as much heat as it usually does.
There are, however, some models that use a dedicated second unit to the condenser. In such a scenario, the condenser fan and radiator fan may or may not share the same relay. If the cooling fan does not engage, you can check whether the relay is to blame by swapping it out for a different relay.
The cooling fan relay essentially functions as the switch for the engine’s cooling fans, and is therefore an important electrical component of the vehicle’s cooling system.
There are several ways to tell if a bad cooling fan relay is to blame for an overheated engine. You can try the following methods: The easiest method is to start the engine and then turn on the air conditioning. If the fan doesn’t engage, there may be something wrong with the cooling fan relay. Of course it may be the fan.
Rather than uncommonly high engine temps, the driver may notice that the cooling fans have stopped running. A faulty or broken relay cannot deliver power to the cooling fans. In turn, the unpowered fans won’t run, leaving the radiator to its own devices.
Is there a way to test a radiator fan?
You can test the electrical radiator fans by taking a wire from the car battery, unplug the radiator fan connector, and put 12v+ and ground into the connector. This is the fastest and easiest way to test your radiator fans.
Where is the relay on a radiator fan?
The fan relay is often located in the engine bay’s fuse box, but the best way is to check your repair manual to find where it is located. Testing a 4 pin relay is often very straightforward. Remove the relay and give 12 volts to pin 30 and 85. Ground pin 86 and check if there is voltage coming out from pin 87.
What should the resistance of a fan relay be?
A normal relay’s resistance will read between 40 to 80 ohms. Higher resistance levels warn that the coil has started to fail while lower readings mean the relay has broken down. Still another DIY test involves shaking the cooling fan relay and listening for any noises.