What does ABS mean on a Pontiac G6?
anti-lock braking
The anti-lock braking (ABS) system is used to maintain wheel motion and traction while braking, accelerating or cornering on a slippery surface. This system uses the same components as the traction control system (TCS), and the functionalities of both are integrated through the ABS control module.
How to reset the sensor for an ABS on a Pontiac Grand Prix?
by Daniel Valladares. The only tool required to reset the sensor for the ABS system on a Pontiac Grand Prix is a socket wrench. Because the ABS system sensor uses the electrical system, resetting the electrical system will reset the ABS system.
What kind of ABS system does a Pontiac use?
Bosch ABS modules are commonly found in 2000-era Pontiac and other General Motors vehicles. Pontiacs use Bosch 5.3 and 5.4 anti-lock brake systems. A failed module on a General Motors vehicle will produce all or some of the following: ABS warning light, TCS off warning light, PCS warning light, and DTC error code C0550.
What causes bad ABS on Pontiac Grand Prix?
Grab it at 12 and 6 position and shake it. Any movement equals bad bearings. This will cause the wheel speed sensor to move around and be read as a faulty ABS/Traction Indicator. Then grab it at 3 and 9 and shake it, movement will most likely be worn outer tie rod ends. Same part for either side.
When does traction control go off in a Grand Prix GT?
When the lights are on and the error messages are on your control panel, the traction control is disabled. I have a 2004 Grand prix GT. Sometimes when im applying the brakes and turning at the same time, my abs kicks in. and sometimes the abs light, trac control light and the service brakes lights all come on.
Bosch ABS modules are commonly found in 2000-era Pontiac and other General Motors vehicles. Pontiacs use Bosch 5.3 and 5.4 anti-lock brake systems. A failed module on a General Motors vehicle will produce all or some of the following: ABS warning light, TCS off warning light, PCS warning light, and DTC error code C0550.
How does ABS work on a Grand Prix car?
The ABS system monitors the wheel-speed sensors and relieves brake pressure on a wheel that it senses is nearing lock-up. The Traction Control system monitors the same wheel-speed sensor and applies brake pressure to any wheel it senses over accelerating.
What does a failed ABS module on a General Motors vehicle Mean?
A failed module on a General Motors vehicle will produce all or some of the following: ABS warning light, TCS off warning light, PCS warning light, and DTC error code C0550. If you cannot communicate with the EBCM (the ABS module) with diagnostic software, that is the most reliable sign that the module has failed and is rebuildable.