How to reset the oil light on a Pontiac Montana?
Pontiac Montana Oil Light Reset Procedure: 2001-2009. Display the “Oil Life Remaining” message in the Driver Information Center. Press and hold the SET/RESET button on the Driver Information Center for more than 5 seconds (on vehicles without DIC, use the TRIP reset stem for SET/RESET) The oil life will change to “100%”.
How does the maintenance light reset at an oil change?
Turn ignition switch to ON position with engine off. Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key. Change Oil lamp will flash for 2-10 seconds while it resets. Once it stops flashing, the maintenance light reset is complete.
How long does it take to reset oil lamp on Chevy Captiva?
Turn ignition switch to ON position with engine off. Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key. Change Oil lamp will flash for 2-10 seconds while it resets.
Why does the oil pressure light come on when there is no oil in the engine?
Low Engine Oil Level To create an oil pressure in the engine, the engine needs to pressurize oil. If there is no oil to pressurize, it will be impossible for the oil pump to properly do its job. If your oil pressure light comes on and sometimes disappears, especially when you turn the car, a low engine oil level may cause it.
https://www.youtube.com/watch?v=baiXiQ-5T-o
How to reset oil life on GMC Savana?
Display the “Oil Life Remaining” message in the Driver Information Center Press and hold the SET/RESET button on the Driver Information Center for more than 5 seconds (on vehicles without DIC, use the TRIP reset stem for SET/RESET) Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key
Pontiac Montana Oil Light Reset Procedure: 2001-2009. Display the “Oil Life Remaining” message in the Driver Information Center. Press and hold the SET/RESET button on the Driver Information Center for more than 5 seconds (on vehicles without DIC, use the TRIP reset stem for SET/RESET) The oil life will change to “100%”.
Turn ignition switch to ON position with engine off. Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key. Change Oil lamp will flash for 2-10 seconds while it resets. Once it stops flashing, the maintenance light reset is complete.
Turn ignition switch to ON position with engine off. Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key. Change Oil lamp will flash for 2-10 seconds while it resets.
Display the “Oil Life Remaining” message in the Driver Information Center Press and hold the SET/RESET button on the Driver Information Center for more than 5 seconds (on vehicles without DIC, use the TRIP reset stem for SET/RESET) Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key