Why does my car make a growling noise at work?
At work, usually the sound is the over-running clutch. Wanna find out for sure, go take the cap off the over-running clutch, spray some PB blaster or lubricant in it, and put the cap back on. Does the sound get better?
Why does my Chrysler 03 make a growling noise when idle?
Ususally the ‘rawr rawr rawr rawr rawr’ sound at idle is the over-running clutch on the alternator. I know that is what it is on my 03.
Why does my Jeep Grand Cherokee make a grinding noise?
I had a metal grinding noise on my 2006 Jeep Grand Cherokee that I thought was a wheel bearing going out. It was making the noise mostly when accelerating but not on braking or when in neutral. I found the problem to be a CV joint that is on the prop shaft that links the transfer case to the front axle. Loading…
What makes a growling noise when the a / C is on?
New belt was put on about 6 months when water pump was replaced. The growling noise usually is worse when the A/C is on but again would go away as soon as the RPM increased so I didn’t think it would be the A/C compressor or clutch. So today, I tried one of the easier things that I was capable of doing, I replaced the idler pulley.
I had a metal grinding noise on my 2006 Jeep Grand Cherokee that I thought was a wheel bearing going out. It was making the noise mostly when accelerating but not on braking or when in neutral. I found the problem to be a CV joint that is on the prop shaft that links the transfer case to the front axle. Loading…
What causes a howling noise in the rear of a car?
Cause:Worn rear pinion bearing or worn gear set Noise:Howl without whir or rumble while accelerating at any speed (gears previously quiet) Cause:Worn gear set due to lack of lubrication or overloading Noise:Howling while accelerating over a small speed range (gears previously quiet) Cause:Worn gear set due to lack of lubrication or overloading
What causes a loud grinding noise when making a turn?
Cause: Posi chatter due to improper lubrication; worn clutches or spider gears; improper assembly Noise:Banging, crunching, or popping while making a turn. Noise not affected by temperature Cause: Badly worn or broken spider gears Noise:Banging or heavy clicking every two to three feet during acceleration and deceleration
Why does my differential make noise while decelerating?
Sometimes, the noise is not differential-related, but is caused by other driveline or axle components. This guide will help you match up the noise you’re hearing with the differential or axle component making it, or at least get you in the ballpark. Noise: Howl while decelerating (gears previously quiet) Cause: Loose pinion bearingpreload