What do I need to program my Pontiac key fob?
Domestic automakers usually include instructions with your owner’s manual about how to program your key fob. Pontiac does include programing instructions for the Aztek, Vibe, and Montana, but not for the Bonneville, G6, Grand Am, Grand Prix, Montana SV6 or Sunfire models.
How do you program a 2005 Pontiac Vibe?
A chime will sound three times to let you know that you are in programming mode. Press both the “lock” and “unlock” buttons on the remote for about 30 seconds. A chime will sound twice if the remote has been programmed successfully. To exit the programming mode, simply remove the key from the ignition. Enter your 2005 Pontiac Vibe.
How can I program my Pontiac door lock?
Release the door lock. A chime will sound three times to let you know that you are in programming mode. Press both the “lock” and “unlock” buttons on the remote for about 30 seconds. A chime will sound twice if the remote has been programmed successfully. To exit the programming mode, simply remove the key from the ignition.
Where is the ignition key on a 2005 Pontiac?
Put your key in the ignition and remove it. Using the legend on the fuse panel as your guide, remove the “BCM PRGRM” fuse. You can access the fuse panel by opening the front passenger door. Close all of the doors and the lift gate. Insert your key into the ignition, and turn to the “ACC” position.
How to program the 2005 Pontiac Montana key fob?
Enter your 2005 Pontiac Montana with all of your remotes. This is important because all of the remotes will erase once you enter programming mode. Put your key in the ignition and remove it. Using the legend on the fuse panel as your guide, remove the “BCM PRGRM” fuse.
Where can I get a Pontiac key fob?
These models require you to go to a Pontiac dealership or a licensed Pontiac vendor such as an automotive locksmith to program your key fob. For the Aztek, Vibe and Montana, programming is easy to do yourself.
How to program the 2005 Pontiac Vibe key fob?
Enter your 2005 Pontiac Vibe. Lock and close all the doors except for the driver’s side — leave the driver’s side open. Within five seconds, insert the key into the ignition and then pull it out. Do not turn the key. Within the next 40 seconds, close and then open the driver’s door twice and insert the key again.
How to program the 2005 Pontiac Aztek key fob?
For the Aztek, Vibe and Montana, programming is easy to do yourself. Enter your 2005 Pontiac Aztek. Close all doors. Press and hold the “unlock” button on the driver’s door. While holding the door lock, insert the key twice without turning it. Insert it a third time and leave the key in the ignition. Release the door lock.