When did my Grand Am security light go on?
1999 – 2004 Pontiac Grand Am In June of 2008, at 79598 miles on the odometer, I began having trouble with my 2002 Pontiac Grand Am SE. The first thing I noticed as I was driving to work was that the “SECURITY”light was on. There did not seem to be any effect on driving, however, and I continued on to work.
How to repair a Grand Am PassLock security system?
Shake the unit and listen for water inside. If there is no problem with the Body Control Module, slide it back in place, making sure it is secure in it’s mount. Inspect the three connectors on the wiring harness to make sure all contacts are clean and not corroded.
When did I start having problems with my Grand Am Se?
In June of 2008, at 79598 miles on the odometer, I began having trouble with my 2002 Pontiac Grand Am SE. The first thing I noticed as I was driving to work was that the “SECURITY”light was on. There did not seem to be any effect on driving, however, and I continued on to work.
What is the ignition lock part number on a Pontiac Grand Am?
6/7/2011 Finally, the PREFERRED method of doing this modification Through the radio cavity, NO SOLDERING REQUIRED bergerweb.net/PasslockFix Note: 09/24/2010 The ignition lock part number is the same for all these cars: 1999 – 2004 Oldsmobile Alero 1997 – 2003 Chevrolet Malibu 1999 – 2004 Pontiac Grand Am
1999 – 2004 Pontiac Grand Am In June of 2008, at 79598 miles on the odometer, I began having trouble with my 2002 Pontiac Grand Am SE. The first thing I noticed as I was driving to work was that the “SECURITY”light was on. There did not seem to be any effect on driving, however, and I continued on to work.
How to bypass the PassLock sensor on a 2002 Pontiac Grand Am?
This web page will guide you through the steps necessary to bypass the “Passlock Sensor” on a 2002 Pontiac Grand Am, and keep the “SECURITY” light off forever. The steps necessary are similar on the other models listed above. There are generally only minor differences in how to get the radio out to get to the wires.
In June of 2008, at 79598 miles on the odometer, I began having trouble with my 2002 Pontiac Grand Am SE. The first thing I noticed as I was driving to work was that the “SECURITY”light was on. There did not seem to be any effect on driving, however, and I continued on to work.
6/7/2011 Finally, the PREFERRED method of doing this modification Through the radio cavity, NO SOLDERING REQUIRED bergerweb.net/PasslockFix Note: 09/24/2010 The ignition lock part number is the same for all these cars: 1999 – 2004 Oldsmobile Alero 1997 – 2003 Chevrolet Malibu 1999 – 2004 Pontiac Grand Am
Why are the lights not working on my Pontiac Grand Am?
There is a sensor inside the ignition cylinder that has an electronic password. And i had read that if it is the ignition then the lights would not turn off. When you turn the key, the password is sent to the body control module and if it matches, the car will start…if it doesn’t, it won’t start. .
Why is the security light on on my Grand Prix?
You cannot just turn it off unless the problem is fixed. The security light is on because you have a problem with your Passlock theft system. There are temporary fixes, like doing a re-learn of the theft deterrent, but the problem will come back. Most likely, you need a new ignition cylinder. Those are what usually go bad on the Grand Prix cars.
How much oil do you put in a Pontiac Grand Am?
The amount of oil you want to put in the engine is 4.8 liters or 5 quarts. That is straight from General Motors. Thank you very much. Not a problem, thank you and have a good night!
Why is my PassLock not working on my Grand Am?
It turns out that although the most common culprit is a Security module in the ignition switch, there are several other possible causes for this Passlock problem. Anything which causes the apparent resistance in the circuit to change by a significant amount will trigger the security system, and cause the car not to start.
What to do if your Grand Am won’t start?
When your Grand Am turns over but won’t start it maybe your anti-theft security system. When the security light blinks, the car won’t start. You must do a simple reset. The procedure in this video is what worked for us. Use of the free information in this video is at your own risk.
How long does it take to turn off a GM security light?
Leave the key in the “ON” position for approximately 11 minutes. The security light will be steady on or flashing for the 11-minute period. Do not proceed to Step 2 until the security light turns off or stops flashing. 2. Turn the ignition switch to the “OFF” position for 30 seconds. 3.
It turns out that although the most common culprit is a Security module in the ignition switch, there are several other possible causes for this Passlock problem. Anything which causes the apparent resistance in the circuit to change by a significant amount will trigger the security system, and cause the car not to start.
When your Grand Am turns over but won’t start it maybe your anti-theft security system. When the security light blinks, the car won’t start. You must do a simple reset. The procedure in this video is what worked for us. Use of the free information in this video is at your own risk.
What are the names of the Pontiac warning lights?
Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue). There are over 40 of them, so search carefully! Models examined include G3, G5, G6, G8, Grand Prix, Solstice, Torrent, and Vibe.
Why does my Pontiac Grand Am Not Start?
On the 2002 Pontiac Grand Am, Olds Alero, and several other GM cars, the Ignition lock cylinder is the most likely cause of cars not starting because of security system malfunctions. Wear in the ignition cylinder causes the electronics within the security module to present a different signal to the yellow wire.
There is a sensor inside the ignition cylinder that has an electronic password. And i had read that if it is the ignition then the lights would not turn off. When you turn the key, the password is sent to the body control module and if it matches, the car will start…if it doesn’t, it won’t start. .
Why are my Pontiac Grand Am security lights not turning off?
The theft deterrent is disabling the starting of the vehicle because you have a problem with it. Your vehicle has what’s called ‘Passlock’. There is a sensor inside the ignition cylinder that has an electronic password. And i had read that if it is the ignition then the lights would not turn off.
What to do if your PassLock security light flashes?
“After attempting to start the engine, if the “SECURITY” light flashes or stays on, wait ten minutes with the key in ON until the light goes off. Then turn the ignition to OFF before attempting to start the engine again.” This normally works! Unfortunately, a few weeks later, you will probably have to go through the entire routine again.
How to turn off GM PassLock security Telltale?
Here it is in it’s entirity. Turn ON the ignition, with the engine OFF. Attempt to start the engine, then release the key to ON (vehicle will not start). Observe the SECURITY telltale, after approximately 10 minutes the telltale will turn OFF. Turn OFF the ignition, and wait 5 seconds .
This web page will guide you through the steps necessary to bypass the “Passlock Sensor” on a 2002 Pontiac Grand Am, and keep the “SECURITY” light off forever. The steps necessary are similar on the other models listed above. There are generally only minor differences in how to get the radio out to get to the wires.
What should I do if my PassLock security light goes off?
If nothing happens or the engine starts and dies, the security light will be flashing. Wait ten minutes. The flashing light should go off or illuminate without flashing. When it does, turn the ignition off, wait twenty seconds, and then try to start the engine. If it starts and runs, everything is okay.
Why does my 2003 Grand Am Not Start?
My 2003 Grand Am sometimes wont start. I’ve noticed that when it wont start, the security light is flashing. To resolve the problem I have to leave the key in the ignition with it in the “ON” position for 12 minutes to reset the sensor. The sensor light wiull stop flashing when it is reset.
How to fix a Pontiac Grand Am PassLock sensor?
Best way to fix is to permanently disable/disconnect passlock system. Not fixed, security light comes on solid and goes away in different time intervals while driving, then after a couple of starts it goes in that limp mode where the security light blinks. I continuously have to wait until the light stops blinking….
What to do when your security light stops flashing?
Turn the key to the on position for 10 minutes then turn off, repeat 2 more times. the system should reset. Mine usually resets on the second time, if the security light stops flashing then i try to start. My mechanic told me it takes three times to reset but it never has on my car, good luck. 94 people found this helpful.
Shake the unit and listen for water inside. If there is no problem with the Body Control Module, slide it back in place, making sure it is secure in it’s mount. Inspect the three connectors on the wiring harness to make sure all contacts are clean and not corroded.
How big is resistor on GM PassLock system?
If you can’t find something anywhere near to what you read on the ohm meter you have the option to use a resistor between 0.5K ohms up to 13.6K ohms.