Where is the anti lock brake relay on a Pontiac Grand Am?
If your car is a 2000 or newer you might find the anti lock brake relay underneath the battery tray along the left frame rail of the car. If you go to auto zone they will plug the code scanner into your car for free.
What does ATC stand for on a Pontiac Grand Am?
ATC stands for automatic traction control. If your car is a 2000 or newer you might find the anti lock brake relay underneath the battery tray along the left frame rail of the car. If you go to auto zone they will plug the code scanner into your car for free.
How much does a Pontiac Grand Am touch cost?
It sounds like it is a $700-$900cdn touch. I have about 71k on my GA and I have already replaced both the left and right wheel bearing retaining hubs. Recently over the last 2 months these lights have been coming on intermittently, generally when driving in wet weather. Any ideas?
Where to get a service engine for a Pontiac Grand Am?
Go to a parts store like O’Riely or AutoZone and use the code scanner. That should give you a good place to start. You can use the code scanner for free or very low cost. You do NOT need to buy one. This could be anything from a cracked vacuum line to a bad computer.
When did the G6 traction control light come on?
The Pontiac G6 was a midsize car that was produced by General Motors. It was introduced in 2004 for the 2005 model year to replace the Grand Am. Hello. I recently had a traction control light coming on in my Pontiac G5 GT (didn’t see a forum for G5).
If your car is a 2000 or newer you might find the anti lock brake relay underneath the battery tray along the left frame rail of the car. If you go to auto zone they will plug the code scanner into your car for free.
How do you replace a Pontiac Grand Am security light?
Remove the cylinder from the ignition switch and replace with a new cylinder and Passlock housing….after replacement you will need to do a theft re-learn. To know exactly, you’d need a proper scanner to access the body control module and check for theft system codes.
It sounds like it is a $700-$900cdn touch. I have about 71k on my GA and I have already replaced both the left and right wheel bearing retaining hubs. Recently over the last 2 months these lights have been coming on intermittently, generally when driving in wet weather. Any ideas?
What to do if your Pontiac Grand Am has a vacuum problem?
If you go to auto zone they will plug the code scanner into your car for free. The code will probably come up as a vacuum problem, and or a 0300 code which is multiple misfires, but don’t sweat the car is probably not misfiring it’s all comeing from the faulty electrical system.
What to do if your ABS sensor is bad?
If, for an example you have a bad front passenger side speed sensor code, first thing you need to do is jack the car up, take both front wheels off, turn the ignition ON and get the reading from the good side connector that leads from the ABS control module to the speed sensor and then get the reading from the bad side connector.
If you go to auto zone they will plug the code scanner into your car for free. The code will probably come up as a vacuum problem, and or a 0300 code which is multiple misfires, but don’t sweat the car is probably not misfiring it’s all comeing from the faulty electrical system.
ATC stands for automatic traction control. If your car is a 2000 or newer you might find the anti lock brake relay underneath the battery tray along the left frame rail of the car. If you go to auto zone they will plug the code scanner into your car for free.
What’s the problem with my Pontiac Grand Am lights?
I ran a check on the system of the car, and I’ve discovered that the EBCM (electronic brake control module) is what’s causing the problem with the lights. The module costs around $600.00 but you might be able to go to a dealer and have the tech reprogram the module.