Why does my Samsung Galaxy G6 not start?
While the battery cables are not necessarily the most likely issue to cause your G6 to not start, they are some of the easiest to diagnose. You can take a look at the battery poles where the cables connect. If there appears to be green or white corrosion all around it, cleaning them may help get you back on the road.
Why does my new car battery not start?
If your new car battery still won’t start, read the following for a breakdown of the most common reasons this might be happening. – A fuse is blown. – The cells are not filled with the proper amount of water.
What causes no start on Pontiac G6 CYL?
A condition has been identified that could cause a NO crank/No communication on the LE5-4 cyl engine. This condition has been identified as a loose ground G105 behind the A/C compressor. Remove the bolt from G105 and clean the engine block surface. You should also make sure the terminal is tight after the bolt is tightened up.
Why does my GM car say no start no crank?
How to diagnose a no start no click on GM vehicle. If you have a late model GM vehicle and turn the key only to hear nothing, you’ll most likely think you have a dead battery—and you may. But a no start, no crank, no click condition can be far more involved than that.
While the battery cables are not necessarily the most likely issue to cause your G6 to not start, they are some of the easiest to diagnose. You can take a look at the battery poles where the cables connect. If there appears to be green or white corrosion all around it, cleaning them may help get you back on the road.
A condition has been identified that could cause a NO crank/No communication on the LE5-4 cyl engine. This condition has been identified as a loose ground G105 behind the A/C compressor. Remove the bolt from G105 and clean the engine block surface. You should also make sure the terminal is tight after the bolt is tightened up.
What does it mean when your car won’t start on 9 volts?
The car won’t run on 9 volts. You need to charge your battery (if possible). If that doesn’t up the voltage on your battery to 12.8V or more then you need to get a new battery. Error on the odometer usually means a miscommunication between the PCM (and sometimes BCM). In my case, I had to get a new PCM.
Why does my Pontiac G6 say lost communication?
Borrowed a diagnostic tool from a friend and it showed the following… lost communication with engine control module/powertrain control module “A”. Also want to add that battery shows only 9 volts at terminals + neg. cable is a bit loose connecting to battery. Will a low battery cause this lost communication thing?