What kind of car was the Pontiac Fiero?
The Pontiac Fiero 2M4 was a small car built by Pontiac in model years 1984 to 1988. The Fiero 2M4 was 2-seat, Mid-engine, and 4 cylinders, and Pontiac didn’t have to share it with any other General Motors division. It had a drag coefficient of .377, flush glass, concealed headlights, and little trim.
What kind of engine did the 1984 Indy Fiero have?
A 2.7 L (165 cu in) 232 hp (173 kW) SD4 engine powered the 1984 Indy Fiero Pace Car to over 138 mph (222 km/h) during the race.
When did they change the design of the Fiero?
Finally, in 1988, numerous changes were made to the Fiero to bring it in line with its original design. The most significant was a completely redesigned suspension (and parts of the space frame) to realize the potential of the mid-engine layout.
What kind of fuel economy does a Fiero have?
There was the Fiero Coupe, the Sport Coupe and the SE. The Fiero Coupe, also called “Fuel Economy Leader”, came with the MY-8 4-speed manual transaxle that had a 0.73 overdrive top gear along with a high mpg 3.32:1 axle ratio.
Where to buy a 1984 Pontiac Fiero 2M4?
This 1984 Pontiac Fiero 2M4 is for sale here on Craigslist in Raleigh, North Carolina. This Fiero 2M4 is an all original car that has been garaged and is well maintained. It is super clean and runs like new. The car has new tires, new radiator, and is free of leaks. It features 13-inch standard rally steel wheels with trim rings.
When did the Pontiac Fiero GT V6 come out?
The truth is that within a couple years of the Fiero’s introduction, the car was well sorted and the 1986 model I was able to ride in is a great example of just how far the design had come.
What was the problem with the Pontiac Fiero?
Like so many GM products before it, the Fiero is one of those cars that was killed just about the time its full potential was being realized. Initially the cars suffered from quality issues and design problems.
When was the first year of the Fiero?
The result was rather lackluster and the media received it with mixed reactions. Motor Trend gave the Fiero a decent review in 1984 but other magazines felt that, as an aggressively styled mid-engine car, it needed to have more performance. Whatever the case, the public loved what they saw and bought almost 187,000 units in 1984.
Fiero Info. The Pontiac Fiero is a mid-engined sports car built by Pontiac from 1983 to 1988. The Fiero was designed by George Milidrag and Hulki Aldikacti as a sports car. The Fiero was the first two-seater Pontiac since the 1926 to 1938 coupes, and also the first and only mass-produced mid-engine sports car by a U.S. manufacturer.
What are the pros and cons of a 1985 Pontiac Fiero?
Factory stock, unmolested Fieros are quickly going extinct. Grab one while you can. And most of all, have fun. Pros: Exotic styling that is affordable. Many GM model replacement parts fit it. Interior has surprising head/legroom. Head turning looks and curve hugging ability completely stock.
When did the Pontiac Fiero get the Getrag?
The 1985 Fiero was a sporty commuter. It wasnt until 1987, that it got the 5-speed Getrag transmission and it didnt receive the Lotus-style suspension and all the other upgrades until 1988, the final production year.
What kind of engine does a Pontiac Fiero have?
The 2.8 V-6 Fieros (either auto or standard trans versions) will run circles around the 4 cyl models, but at the sacrifice of some fuel efficiency. If you purchase a V-6 model, hang on tight, because these cars seem a lot quicker that the 140 hp factory rating suggests.
In the 80’s Pontiac Fiero was the car, according to many, assembled from parts of other GM models. This led to a loss of popularity among the public, however, a later version of the car was pretty good in terms of performance. It followed a long time for Pontiac, in which all the cars were sold only other models of GM, but with Pontiac logo.
Can a V8 engine be installed in a Fiero?
How-to install an LT1 V8 and 4T60-E into a Fiero. There are several kits available in the aftermarket that include all of the instructions and parts needed to install a small-block Chevy V8 engine into a Fiero. However, most of these kits are made for earlier versions of the SBC, or pre-LT1 versions.
How is the rear transmission mount on a Fiero made?
The rear transmission mount bolts to the transmission but is welded directly to the cradle. It is made from 2 pieces of 1/8″ thick mild steel: Final marking and drilling of the holes is made after final placement of the powertrain is determined.
Why do I need to clean my Fiero transmission?
Grime and dirt can cause fluid build-up, which can clog these lines. Avoid clogged lines by wiping off debris from all your Fiero’s parts, such as the transmission’s gaskets, pan, case, and sealing surface, and any dirt residue found on its exhaust system. Accumulated dirt can damage your transmission. Always keep its lines clean.
What was the purpose of the Pontiac Fiero?
The Fiero was conceived as a small, two-seat sports car with all new suspension and V6 engine. While General Motors management and accountants were opposed to investing in a second two-seater sports car that might compete with the Corvette, they perceived the oil crisis as a market opportunity for a fuel-efficient sporty commuter car.
Are there any aftermarket parts for a Fiero?
We have everything from affordable Fiero aftermarket parts to high-end Pontiac Fiero performance parts. We have an excellent selection of Fiero custom parts, like body kits, carbon hoods, custom seats, and rims, to name a few.
Do you need to replace transmission on Pontiac Fiero?
Transmission – Part of the reason you may enjoy driving your Fiero is due to the way that it shifts through the gears. Whether you have an automatic or a manual transmission, you may need to replace parts on it after some time. We carry the clutch and its components, as well as the transmission seals and filters.
What kind of engine do I need to upgrade my Fiero?
This engine will bolt up directly to the Fiero transmission. Replacement of the stock Fiero Engine with a 3800 Supercharged Engine is one of the highest levels of engine upgrade that you can perform to your Fiero.