How to read the stored codes from a 1996 Peugeot 306?
In this instructable I will show how to read the stored codes from a 1996 model, left-hand drive Peugeot 306. This car has a Bosch Motronic MP5.1 engine management computer and a 1.6 litre TU5 JP (NFZ) engine. This will be demonstrated using three methods.
What is the fault code for a Peugeot 3?
P0200 Code P0200 is general and indicates a malfunction in the wiring of the power unit injector P0203 Open circuit of the injector control system of the third engine cylinder P0204 In the error catalog, code P0204 indicates an open circuit in the operation of the injector control system in the fourth cylinder
What does the P0300 code on a Peugeot mean?
P0299 Malfunction in boost pressure control system – operating parameter too low P0300 Codes P0300 or 0300 indicate a moving problem associated with a malfunction in the engine cylinders. The engine cylinder number is not indicated, so the user will have to find it on their own.
When does the fault code p1031 come out?
The control unit notes that the position of the natural opening of the throttle is not reached. The problem often comes out after cleaning the latter. The engine stalls immediately at the factory or at idle. P1031 Code P1031 appears during mechanical interlock of a variable valve lift system.
How to read 1996 Peugeot 306 fault code?
Peugeot Citroen Group PSA used a 2-pin DLC connector for many of their models up until around 1997 and a 30-pin DLC connector until the early 2000’s. All 2-pin DLCs allowed reading of 2 digit flash codes, whereas only some 30-pin DLCs allowed reading of 2 digit flash codes.
What kind of problem does a Peugeot 206 have?
Peug 406 multifunction display is dark. Peugeot 1007 1.4 hdi intermittent cutting out. Peugeot 206-Poor starting, multiple cylinder misfire and many codes! 2003 peugeot 206 wont start?? **** NOW FIXED ****
What are the problems with the Peugeot 1007?
Peug 406 multifunction display is dark. Peugeot 1007 1.4 hdi intermittent cutting out. Peugeot 206-Poor starting, multiple cylinder misfire and many codes!
What are the fault codes for Peugeot cars?
PEUGEOT Fault Codes DTC list – U35FF (F5FF, 5FF) Defect of arbitrary reinitialization of the intelligent switching module. Problems can occur in the operation of various body systems. For example, front or rear wiper blades can be activated without driver intervention.