What kind of oil does a bobcat 753 take?
753 G-Series Skid-Steer Loader calls for a “AW 32 Hydraulic Oil Fluid (ISO VG 32, SAE 10W)” and needs about three 5Gal buckets.
When to change the oil in a skid steer?
They also recommend that you change the hydraulic filters at the 250-hour mark. Once your skid-steer has put in 500 working hours, it’s time to change the fuel filter. It also time to check and adjust the chain tension. At the 1,000-hour mark, the radiator coolant, chain case oil, and hydraulic oil should be changed.
How often should I change the oil in my Bobcat?
I decided to check my manual and it recommends: Engine oil & filter @ 500 hrs or 250 hrs if in severe operating conditions. Fuel filter @ 250 hrs. Hydrostatic filter, charge filter, steering valve filter (A300 only), & reservoir breather @ 500 hrs. Air Filters are recommended to check daily but service only when required.
How often should a skid steer be serviced?
That is why regular maintenance is so important. A skid-steer’s maintenance is typically based on how many hours the machine is running, and is usually broken into 8 hours (daily), 250 hours, 500 hours, and 1,000 hours. Let’s see what the experts recommend!
Where can I find a bobcat maintenance schedule?
Download the service schedule for your machine below. Each schedule includes information about maintenance points that should be completed at specific hourly operation intervals. See your operation and maintenance manual to learn how to safely perform each maintenance procedure.
I decided to check my manual and it recommends: Engine oil & filter @ 500 hrs or 250 hrs if in severe operating conditions. Fuel filter @ 250 hrs. Hydrostatic filter, charge filter, steering valve filter (A300 only), & reservoir breather @ 500 hrs. Air Filters are recommended to check daily but service only when required.
They also recommend that you change the hydraulic filters at the 250-hour mark. Once your skid-steer has put in 500 working hours, it’s time to change the fuel filter. It also time to check and adjust the chain tension. At the 1,000-hour mark, the radiator coolant, chain case oil, and hydraulic oil should be changed.
That is why regular maintenance is so important. A skid-steer’s maintenance is typically based on how many hours the machine is running, and is usually broken into 8 hours (daily), 250 hours, 500 hours, and 1,000 hours. Let’s see what the experts recommend!
What kind of oil do you use in a bobcat truck?
In December 2016, API introduced a new heavy-duty oil engine category: CK-4. The new formulations help protect engines from high-heat, high-load conditions typical in non-road applications. CK-4 oils are backwards compatible with all trucks and non-road equipment that use CJ-4 oils.