How do you change the oil on a Pontiac Montana?
For most Pontiacs, you can wrap an old belt around the oil filter and unscrew it by hand. If you can’t do this, see our parts page to find a Pontiac Montana oil filter wrench. If your Montana is too low to the ground to access your drain plug and oil filter, be sure to use jack stands and safe jacking procedures before getting under your Montana.
How to get an oil well permit in Montana?
Oil & Gas Well Facilities with potential emissions greater than 25 tons per year require a Montana Air Quality Permit or Registration in lieu of a permit. More information can be found at the following link: http://deq.mt.gov/Air/BI/airforms. Bond amounts are established under ARM 36.22.1308 .
How to reset oil life on GMC Savana?
Display the “Oil Life Remaining” message in the Driver Information Center Press and hold the SET/RESET button on the Driver Information Center for more than 5 seconds (on vehicles without DIC, use the TRIP reset stem for SET/RESET) Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key
How to change the oil in a Nissan D21?
1. Getting Started – Prepare for the repair 2. Open the Hood – How to pop the hood and prop it open 3. Find Oil Drain – Locate the oil drain plug underneath the vehicle 4. Drain Oil – Set up the workspace, drain oil and replace plug 5. Find Oil Filter – Locate the oil filter 6. Remove Filter – Position drain pan and remove the oil filter 7.
For most Pontiacs, you can wrap an old belt around the oil filter and unscrew it by hand. If you can’t do this, see our parts page to find a Pontiac Montana oil filter wrench. If your Montana is too low to the ground to access your drain plug and oil filter, be sure to use jack stands and safe jacking procedures before getting under your Montana.
How does the maintenance light reset at an oil change?
Turn ignition switch to ON position with engine off. Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key. Change Oil lamp will flash for 2-10 seconds while it resets. Once it stops flashing, the maintenance light reset is complete.
Display the “Oil Life Remaining” message in the Driver Information Center Press and hold the SET/RESET button on the Driver Information Center for more than 5 seconds (on vehicles without DIC, use the TRIP reset stem for SET/RESET) Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key
How to change the oil in a Kia Sorento?
Replace Filter – Add oil to the new oil filter and insert it 8. Remove Oil Cap – Take off the oil fill cap 9. Add Oil – Determine the correct oil type and add oil 10. Replace Cap – Put the oil fill cap back on the engine 11. Leak Inspection – Start vehicle and visually inspect for leaks 12. Remove Dipstick – Locate, remove and wipe oil dipstick 13.