How to adjust cable length on Nissan Sentra?
Adjust the length (L) between the cable stopper (A) and the shift selector to the standard value. Insert the stopper (A) until it reaches the selector cable. Move the shift selector to each gear position to check that there are no bindings. If any, repeat the adjustment of the length between the cable stopper and the shift selector.
How to remove differential seals from Nissan Sentra?
Refer to FAX-18, “6M/T : Removal and Installation (LH)”. Remove differential side oil seals (1) from clutch housing and transaxle case using a suitable tool. Do not damage transaxle case and clutch housing. Installation is in the reverse order of removal. Install differential side oil seals (1) to clutch housing and transaxle case, using Tools.
How to install a Nissan Sentra 6m / T?
Remove front drive shafts. Refer to FAX-18, “6M/T : Removal and Installation (LH)”. Remove differential side oil seals (1) from clutch housing and transaxle case using a suitable tool. Do not damage transaxle case and clutch housing. Installation is in the reverse order of removal.
How do you remove the shift selector on a Nissan Sentra?
Pull out and disconnect the selector cable from the pin of the shift selector assembly, using a suitable tool. While pressing the lock of the selector cable in the direction of the arrow shown, remove the selector cable from the shift selector assembly.
Adjust the length (L) between the cable stopper (A) and the shift selector to the standard value. Insert the stopper (A) until it reaches the selector cable. Move the shift selector to each gear position to check that there are no bindings. If any, repeat the adjustment of the length between the cable stopper and the shift selector.
Pull out and disconnect the selector cable from the pin of the shift selector assembly, using a suitable tool. While pressing the lock of the selector cable in the direction of the arrow shown, remove the selector cable from the shift selector assembly.
Refer to FAX-18, “6M/T : Removal and Installation (LH)”. Remove differential side oil seals (1) from clutch housing and transaxle case using a suitable tool. Do not damage transaxle case and clutch housing. Installation is in the reverse order of removal. Install differential side oil seals (1) to clutch housing and transaxle case, using Tools.
What do I need to install a Nissan Sentra?
Remove the heat plate fixtures (A). Remove the shift cable and selector cable from the bracket. Disengage the pawls (a) of the grommet (1), and pull downwards to remove. Remove the shifter cable and selector cable from the vehicle. Installation is in the reverse order of removal.