How do you reset the TPMS light on a Nissan Versa?
With the vehicle off, turn the key to the “On” position, but don’t start the car. Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait 20 minutes for the sensor to refresh.
When to turn on TPMs on Nissan Versa?
● The TPMS does not monitor the tire pressure of the spare tire. ● The TPMS will activate only when the vehicle is driven at speeds above 16 mph (25 km/h). Also, this system may not detect a sudden drop in tire pressure (for example a flat tire while driving).
How to reset the Nissan tire pressure light?
Repair Topics > Tires > Reset Nissan Tire Pressure… If your Nissan tire pressure light comes on or flashes, here’s the best way to refill your tires and reset the tire pressure light at the same time. Start by turning the IGN switch to the OFF position. Then turn back to ON.
How to relearn the Nissan TPMS reset instruction?
Re‐scan each sensor. Drive the vehicle above 30mph for at least 10 minutes and monitor the low tire pressure monitor to ensure it does not blink. If you see an error on the screen while performing an OBDII Relearn, check to make sure that the vehicle is in the ON position (not ACC).
How to reset TPMS warning light by yourself?
This video will show you how you can reset TPMS light by yourself by just using a jumper wire or a paper clip on any Nissan, Infiniti, Hyundai vehicle. THIS IS THE BEST AND VERY AFFORDABLE SCAN TOOL. I ONLY RECOMMEND THIS ONE. I USE IT IN ALL MY JOBS. https://www.amazon.com/Launch-Diagnos… https://www.amazon.com/LAUNCH-Icarsca…
● The TPMS does not monitor the tire pressure of the spare tire. ● The TPMS will activate only when the vehicle is driven at speeds above 16 mph (25 km/h). Also, this system may not detect a sudden drop in tire pressure (for example a flat tire while driving).
Repair Topics > Tires > Reset Nissan Tire Pressure… If your Nissan tire pressure light comes on or flashes, here’s the best way to refill your tires and reset the tire pressure light at the same time. Start by turning the IGN switch to the OFF position. Then turn back to ON.
Re‐scan each sensor. Drive the vehicle above 30mph for at least 10 minutes and monitor the low tire pressure monitor to ensure it does not blink. If you see an error on the screen while performing an OBDII Relearn, check to make sure that the vehicle is in the ON position (not ACC).
How often does the tire pressure beep on a Nissan Versa?
If the tire is over-inflated more than approximately 4 psi (30 kPa), the horn beeps and the hazard indicators flash 3 times. To correct the pressure, push the core of the valve stem on the tire briefly to release pressure. When the pressure reaches the designated pressure, the horn beeps once.