How do you change the PCV valve on a Honda Civic?
Use the pliers to squeeze the clamp and slide it back on the vacuum line. Slide the vacuum line off the PCV valve. Grab the PCV valve and twist it while pulling it out. Install the new PCV valve by pushing it into the rubber grommet. Slide the vacuum line onto the PCV valve.
What should I do if my PCV valve is leaking?
If you find the hoses filled with slime, clean them with PCV solvent or lacquer thinner and replace the valve. Or, simply replace those components along with the PCV valve. Many engine models use a simple, inexpensive valve, and many car owners just replace it every service interval.
When is it time to replace the PCV valve?
Most PCV valves contain a spring-loaded device. Once you remove the valve, shake it with your hand. You’ll hear a rattle. If you don’t, it is time to replace the valve. Even if the valve rattles, if your engine is experiencing one or more of the bad PCV valve symptoms described above, it’s a good idea to replace the valve.
Can a PCV valve be installed without an engine?
Some older cars with a PCV valve fitted without an electronically controlled engine will not have this symptom.
What do I need to replace PCV valve in Honda Civic?
Just need a 3/8 drive ratchet, extension, and a 17mm deep socket. Don’t forget to put a new washer on the PCV valve before putting the new PCV valve on the car. Torque spec is 33 p/f of torque. PCV valve: https://amzn.to/2GSoLIA Loading…
How do you pop a PCV valve out of a car?
Take the flat head screw driver and wedge it between the valve and the black box. You should be able to pop it out with ease. The third step is to get out from under your car and look under your hood. The hose to the PCV Valve is located in the middle of the intake mani. Pull this out. Voila!
What’s the valve shape on a Honda Civic?
The D16Y7 valve is different as well… it’s L shaped and not straight as pictured in the first posts. Most of the time you will spend trying to take the old pcv off and putting the new one back on. There are a few DIY’s on other civic forums and on here, just search]
How often do I upload Honda Civic DIY videos?
Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. This channel is dedicated to cars. DIYs, repairs, and maintenance videos. I upload weekly. Ask me anything and I will respond within mins to hours.
When do you need to replace the PCV valve?
There is no fixed interval of when you should replace the PCV valve. However, because the PCV valve is often made of plastic and as you may know – plastic age. Especially because the PCV valve is often mounted in hot places inside the engine bay and because there are passing a lot of fuel/ oil inside the hose at all the time.
What causes a PCV valve to crack in a car?
However, because the PCV valve is often made of plastic and as you may know – plastic ages. Because the PCV valve is often mounted in hot places inside the engine bay and because they pass a lot of fuel/ oil inside the hose at all the time, this will cause the PCV valve or the hoses to crack up sooner or later.
How can I tell if my PCV valve is blocked?
Another way to test for vacuum is to pinch or block the vacuum hose connected to the PCV valve. Idle speed will drop between 40 to 80 rpm, and then rise back to normal. If not, look for a blocked or restricted vacuum hose or valve.
What’s the torque angle on a Honda Civic?
This is called torque-to-yield, where you tighten a bolt to a certain point and then it further. This stretches the bolt and helps create a long-lasting clamping force. You may want to use a torque angle gauge to make sure you’re not over tightening. Can torque specs vary? Yes. In fact, several factors affect torque specs.
When to use new bolts on Honda Civic?
Manufacturers design bolts and screws to “stretch” when they’re install. That way, the bolt and screw threads firmly attach to the matching threaded hole or nut. This lowers or outright eliminates the risk that the bolt or screw will work itself loose. For the same reason it’s always a good idea to use new bolts when working on the engine.
What can cause a Honda Civic to crack?
Not following the prescribed pattern risks having a wheel with loose lug nuts. Another example is the intake manifold. It can crack if the engine’s bolts aren’t tightened in the proper pattern. Most owners manuals include information about the order in which to tighten bolts and screws during reassembly.
When did the Honda Civic del Sol come out?
This article applies to the Honda Civic (incl. Del Sol) (1992-2000). Tightening your bolts too much or not enough can cause a part to fail, and depending on the part, can put your life and the lives of the any passengers in danger.
Okay, so locate the hose that’s connected to the PCV Valve. Now, just pull on it and it should get stuck; leaving a gap between the edge of the PCV Valve and the black box. Take the flat head screw driver and wedge it between the valve and the black box. You should be able to pop it out with ease.
The D16Y7 valve is different as well… it’s L shaped and not straight as pictured in the first posts. Most of the time you will spend trying to take the old pcv off and putting the new one back on. There are a few DIY’s on other civic forums and on here, just search]
Take the flat head screw driver and wedge it between the valve and the black box. You should be able to pop it out with ease. The third step is to get out from under your car and look under your hood. The hose to the PCV Valve is located in the middle of the intake mani. Pull this out. Voila!