Can you replace a fusible link with a regular fuse?
A fuse will not work, you must replace with a fusible link. A fusible link is a solid wire (but smaller awg) placed in a current carrying line where there should NEVER be a dead short.
How does the fusible link work in a car?
A fusible link is essentially a fuse set directly in line with the wiring and works as much like a literal weak link in the chain as you can imagine. Electricity never passes through anything but a superconductor with a zero loss of energy; some of it’s always going to turn into heat.
How big of a wire do I need for a fusible link?
A 50-amp amplifier mounted in the trunk 15 feet from the battery would need a 4-gauge wire, which is good for 70 amps at 16 feet. For the fusible link, add 10 to 15 percent to the accessory draw. In this case, you’d need a link rated at 55 amps, primarily because you’ll have a hard time finding one rated at 57.5.
What kind of engine does a Nissan Hardbody have?
The Nissan hardbody pickup belongs to the D21 series of Nissan-made pickup trucks made between 1990-97. It refers to the pickup’s double-wall bed and styling. The engine used in this model was the KA20E 12-valve engine. The engine bore and stroke is 3.5 inches and 3.78 inches respectively.
Where is the ignition switch on a Nissan veq30e?
The VG30i ,VG30E, VE30DE, VQ30E . computers have either a small toggle switch on the side of the ECU box; or, a slotted mode selector screw that turns 1/4 or 1/2 turn clockwise and counterclockwise to do the same task. 1. Turn the ignition switch on, engine off.
Where is the VIN on a Nissan pickup?
If you do not have access to the owner’s manual, you can find the exact specifications for your pickup by using the VIN number assigned to the vehicle. The VIN is located in a couple of areas on the pickup truck such as on the dashboard by the bottom of the windshield on the driver’s side of the vehicle.
The Nissan hardbody pickup belongs to the D21 series of Nissan-made pickup trucks made between 1990-97. It refers to the pickup’s double-wall bed and styling. The engine used in this model was the KA20E 12-valve engine. The engine bore and stroke is 3.5 inches and 3.78 inches respectively.
What kind of engine does a Nissan Pickup have?
It refers to the pickup’s double-wall bed and styling. The engine used in this model was the KA20E 12-valve engine. The engine bore and stroke is 3.5 inches and 3.78 inches respectively. It has a maximum power of 134 horsepower and a compression ratio of 8.6:1.
When did the Nissan Hardbody pickup come out?
Nissan made the Nissan hardbody engine for pickup trucks sold in the United States and elsewhere. Here is what you should know about the hardbody engines and others made for Nissan pickups. The Nissan hardbody pickup belongs to the D21 series of Nissan-made pickup trucks made between 1990-97. It refers to the pickup’s double-wall bed and styling.