How to remove the rear brake drum on a Nissan Sentra?

Remove the brake drum. Refer to BR-42, “Exploded View”. Make sure the parking brake lever is fully released prior to removal of the brake drum. The rear wheel hub is housed inside the brake drum.

What to do about brake burnishing on Nissan Sentra?

Burnish contact surface between brake lining and brake drum after refinishing or replacing brake lining or brake drum, or if a soft pedal occurs at very low mileage. Refer to BR-20, “Brake Burnishing”. Adjust the brake shoe clearance (parking brake lever stroke). Refer to BR-13, “BRAKE LINING : Inspection”.

How do you remove the rear brake drum?

Make sure the parking brake lever is fully released prior to removal of the brake drum. The rear wheel hub is housed inside the brake drum. Remove the springs (1) by pushing them inward toward the vehicle and rotating, this will release the shoe hold pins, and the brake shoe assembly (brake shoes, each spring, and adjuster).

How are drum brakes used in a car?

Drum brakes (as opposed to disc brakes) are a braking system that slows a vehicle by pressing brake shoes into the inside surface of a metal drum attached to the wheel to create friction. Like any braking system, drum brakes undergo wear and tear with use.

Remove the brake drum. Refer to BR-42, “Exploded View”. Make sure the parking brake lever is fully released prior to removal of the brake drum. The rear wheel hub is housed inside the brake drum.

Can a drum brake be adjusted on a new car?

Adjustments can be done only on brakes that are in good shape. Keep in mind that not all drum brakes are adjustable. To confirm your brakes are in good working order before you adjust them, check your vehicle for symptoms of a bad or failing drum brake. This article covers the adjustment process for drum brakes of the star wheel type.

Where did the Nissan Sentra get its name?

The model was initially imported from Japan, where it was produced at Zama plant. Available in four body styles (two-door sedan, four-door sedan, five-door wagon and three-door hatchback coupe), it was the second car to be marketed in the United States under the nameplate of Nissan and using a model name instead of a number.

Is the Nissan Sentra a rebadged Nissan Sunny?

Until 2006, Sentra was a rebadged export version of the Japanese Nissan Sunny, but since the 2013 model year, Sentra is a rebadged export version of the Nissan Sylphy B17. The Sentra nameplate is not used in Japan.

What kind of engine does a Nissan Sentra have?

While previous Sunny models had used a front-engine, rear-wheel-drive layout, the B11 Sentra was the first to use a front-engine, front-wheel-drive layout. Engine choice was the 67 hp (50 kW) ( E15) 1.5 L four-cylinder SOHC, replacing the old A-Series OHV.

Is the Nissan Sentra part of the Trans valve body?

Please narrow the Trans Valve Body results by selecting the vehicle. Like a human body, the absence of one part or system can render your vehicle futile. One part of your Nissan Sentra is the Valve Body. You must have simple understand of your Sentra Valve Body that you can find some problem correct in time.

Are there any transmission problems with the Nissan Sentra?

The faulty transmissions are typically determined based upon the year it was manufactured. In 2013, the Nissan Sentra saw its worst year. This year had the highest complaint numbers of any other vehicle on the road. This was a very overwhelming issue for Nissan. The majority of the customer complaints were due to Nissan transmission problems.

What happens if your transmission valve is not working?

Your shifter should never slip out of gear if your transmission valve body is fully functional. If the transmission is not able to downshift, then hydraulic fluid may not be entering or navigating the transmission valve body properly. Once this happens, the gears cannot be pressurized properly which degrades the performance of the vehicle.

How many miles does a Nissan Vesa transmission last?

All of these signs point to transmission problems. The Nissan Vesa transmissions are supposed to last on average between 130,000 to 180,000 miles. Individuals are experiencing issues around 70,000. This has become a large problem for Nissan dealerships.

How do you remove the drum from a car?

Grab the brake drum by the edges and pull it off. It may help to wiggle it a bit as you pull. It may be necessary to back off the brake adjuster to remove the drum. This is done through the brake adjustment hole in the drum or on the backing plate using a brake adjuster tool to turn the adjuster to loosen the brakes enough to remove the drum.

Why does my drum brake lock up at the rear?

One of the most common causes of one or two wheel lockup on drum brake equipped vehicles is the service and/or parking brake adjustment. If either one or both of these adjustments are done incorrectly it can result in the rear brakes being very sensitive.

Can a out of round drum cause rear wheel lockup?

Brake drum condition should be factored in when determining the cause of rear wheel lockup. An out of round brake drum or drums that vary in diameter too much from side to side could cause a one wheel lockup condition (Figure 61.8). Measuring drum runout or out of roundness is not easy in the field.

How to remove the rear drum of Nissan Civilian bus-Fixya?

Most rear brake-shoe design take some time to adjust than disc brakes… Try to push the tool downward or upward to check if that’ll spin the brake self-adjuster part smaller to allow the brake shoes to ‘shrink’ which should allow you easy removal of the rear brake drum as you wiggle it out.

How do you change the drum on a Nissan Sentra?

Remove the lug nuts and wheels from both sides. Screw in the two 8-by-1.25 millimeter bolts into the small holes near the hub on the face of the drum. Tighten them inward using the ratchet and socket alternately. Three turns on one bolt, then three turns on the other. This will draw the drum from the hub.

What happens when you change the drum on a car?

Most drum brakes on cars and other common vehicles are hydraulically powered. If there is a leak in the hydraulic system, you may notice fluid inside the drum and on the brake shoes. Usually, this is accompanied by decreased brake performance. If necessary, replace the leaky wheel cylinder.

What’s the best way to remove a brake drum?

Use a screwdriver to attach the brake drum puller’s screw tightly. Tighten the screw until the brake drum puller is securely fastened around the brake drum. Do not over-tighten the screw on the brake drum puller. Knock the back of the brake drum lightly with a hammer. Tap the hammer against the brake drum with an outward motion.

Navigation